Kodak 3000DSV-E manual Code Setting Value

Page 47

To set the Year, Month, Day, Hour and/or Minutes you will use the Exposure Adjustment key (either Darker or Lighter).

Each time the Darker key is pressed, the Exposure Display scrolls upward to select the current setting mode in the following order: Month, Day, Hours, Minutes.

Each time the Lighter key is pressed, the Exposure Display scrolls downward to select a default mode.

Code

Setting Value

d0

Year, month, day (2004.05.15)

 

 

d1

Month day year (05 15 2004)

 

 

d2

Day month year (15 05 1004)

 

 

d3

Month, day Hours:minutes (05.15 13:45)

 

 

Year: 4 digits of dominical year

Month: 2 digits

Day: 2 digits

Hour: 2 digits (24-hour system)

Minutes: 2 digits

4.Press the Exposure Adjustment key (Darker or Lighter) to select the desired setting value.

5.Press the Start key to validate the setting.

3-24

A-61371 September 2004

Image 47
Contents Operator’s Manual Safety Warnings Page Routine Precautions Introduction Product description Installation United States Power source GroundingSystem Printer A3/A4 Laser Printer Space requirementsScanner Operating environment Printer mode connected to the A3/A4 Laser PrinterPC mode connected to a personal computer Front view 3000DSV-E Scanner componentsRear view Auto-retrieval Controllers 3000DSV-E Scanner optional accessoriesFilm carriers Power On Turning the power on and offTo turn the power off Auto Power Save/ Projection Lamp functionsControl Panel Standard Control Panel and FunctionsPage Indicators Control Panel Shift Function Using the Shift function on the Control PanelControl Panel Page Image are masked Image Processing featuresBlack borders that run along the edges Description Using the Scanner Film Scanning Size 11 x 17 A3 2 x 11 A4 3 x 8 1/2 Selecting a projection lensInstalling the projection lens Vertical Horizontal Positioning the film image11 x 17 or A3 size 2 x 14 size 2 x 11 or A4 size Zooming in on the displayed image Zooming and focusing imagesFocusing the displayed image Rotating imagesPosi Positive film Selecting the film typeAuto Nega Negative filmSelecting the paper size Using the Auto Paper Selection functionPage-by-Page Selecting the Print PositionCenter LeftEntering a number from Using Auto ExposureUsing Manual Exposure Selecting the image densityOperating Conditions for Auto Masking Correcting a numberSelecting Auto Masking Manual Masking panels option Defining an area Using Manual MaskingSelecting Trimming Defining Page-by-Page Print Area Defining two separate areasCentering Using Centering and FitClearing a defined Print area Selecting MaskingUsing the Cycle Print Mode Value Period seconds Operating in the Cycle Print ModeSpecifying the interval between scanning operations Registering the Job Program Connection mode Resolution DisplayUsing Electrical Zoom Skip of magnification 10 +Standard Adjusting screen illuminationClearing the Zoom magnification Paper sizeDisplay Function Description Changing settings with the User modeCorrecting Image Distortion Code Setting ValueSet Imprint mode Year, Month and Date Set modeCode Setting Value Upper Unit Lock Release Lever  used to open the Upper Unit Printer FunctionsParts of the printer Page Capacity Loading paper into the paper feeding tray Loading paper into the paper cassette Replacing the toner cartridge Page Page Outer covers MaintenanceCleaning the Scanner screen Carrier Glass option Replacing the projection lampPage Page Display Code Description Troubleshooting/MessagesMessages Other Malfunctions September Clearing misfeeds from the paper feeding tray Clearing a misfeed from the paper cassette Clearing a misfeed from inside the printer Page Cause Action Solving printing problemsSymptom Kodak 3000DSV-E Digital Scanner-Printer Appendix a SpecificationsPC Mode SpecificationsA3/A4 Laser Printer Printer Mode Default Description Appendix B User and System SettingsUser Settings Initial Setting Remark System SettingPattern Paper Disabling Auto switching a Paper Empty modeAppendix C Key Operator Information Eastman Kodak Company