Routine Precautions
•Do not store toner units, PC drum units, and other supplies and consumables in a place subject to direct sunlight and high temperature and humidity, as poor image quality and malfunction could result.
•Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result.
•Do not unpack a toner unit or PC drum unit until the time of use. Do not leave an unpacked unit standing. Install it immediately or poor image quality could result.
•Do not keep toner units and PC drum units in an upright position or upside down, as poor image quality could result.
•Do not throw or drop a toner unit or PC drum unit as poor image quality could result.
•Do not use this product in an area where ammonia or other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance.
•Do not use this product in an environment with a temperature outside the range specified in the Operator's Manual, as a breakdown or malfunction could result.
•Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product, as a malfunction or fire could result.
•Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result.
•Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown.
September 2004 |