Kodak 3000DSV-E manual Correcting a number, Selecting Auto Masking

Page 33

Correcting a number

To reset an entry:

•Press the Clear/Stop key, which resets the number on the Multi-Print display to “1”.

Using Auto Masking The Auto Masking function prevents the frame (non-image area) of a film image from appearing on the print.

Selecting Auto Masking

• Press the Auto Masking key to turn on this function.

Correction

Operating Conditions for Auto Masking

A

B

A

B

BB

•The image area of the screen must provide at least 45 mm horizontally and vertically.

•The width of the frame to be masked must be at least 10 mm.

NOTE: If the film image on the screen does not meet the above requirements, the Auto Masking function will not work properly. Auto Masking is a frame erasing feature, it cannot remove an image from in between two separate frames.

A B

A C

3-10	A-61371 September 2004

Image 33

Contents Operator’s Manual Safety Warnings Page Routine Precautions Introduction Product description Installation United States Power source GroundingSpace requirements ScannerSystem Printer A3/A4 Laser Printer Printer mode connected to the A3/A4 Laser Printer PC mode connected to a personal computerOperating environment Front view 3000DSV-E Scanner componentsRear view Auto-retrieval Controllers 3000DSV-E Scanner optional accessoriesFilm carriers Power On Turning the power on and offTo turn the power off Auto Power Save/ Projection Lamp functionsControl Panel Standard Control Panel and FunctionsPage Indicators Control Panel Shift Function Using the Shift function on the Control PanelControl Panel Page Image Processing features Black borders that run along the edgesImage are masked Description Using the Scanner Film Scanning Size 11 x 17 A3 2 x 11 A4 3 x 8 1/2 Selecting a projection lensInstalling the projection lens Positioning the film image 11 x 17 or A3 size 2 x 14 size 2 x 11 or A4 sizeVertical Horizontal Focusing the displayed image Zooming and focusing imagesRotating images Zooming in on the displayed imageAuto Selecting the film typeNega Negative film Posi Positive filmSelecting the paper size Using the Auto Paper Selection functionCenter Selecting the Print PositionLeft Page-by-PageUsing Manual Exposure Using Auto ExposureSelecting the image density Entering a number fromCorrecting a number Selecting Auto MaskingOperating Conditions for Auto Masking Manual Masking panels option Using Manual Masking Selecting TrimmingDefining an area Defining Page-by-Page Print Area Defining two separate areasClearing a defined Print area Using Centering and FitSelecting Masking CenteringUsing the Cycle Print Mode Operating in the Cycle Print Mode Specifying the interval between scanning operationsValue Period seconds Registering the Job Program Connection mode Resolution DisplayUsing Electrical Zoom Skip of magnification 10 +Clearing the Zoom magnification Adjusting screen illuminationPaper size StandardDisplay Function Description Changing settings with the User modeCorrecting Image Distortion Code Setting ValueSet Imprint mode Year, Month and Date Set modeCode Setting Value Printer Functions Parts of the printerUpper Unit Lock Release Lever  used to open the Upper Unit Page Capacity Loading paper into the paper feeding tray Loading paper into the paper cassette Replacing the toner cartridge Page Page Maintenance Cleaning the Scanner screenOuter covers Carrier Glass option Replacing the projection lampPage Page Troubleshooting/Messages MessagesDisplay Code Description Other Malfunctions September Clearing misfeeds from the paper feeding tray Clearing a misfeed from the paper cassette Clearing a misfeed from inside the printer Page Solving printing problems SymptomCause Action PC Mode Appendix a SpecificationsSpecifications Kodak 3000DSV-E Digital Scanner-PrinterA3/A4 Laser Printer Printer Mode User Settings Initial Setting Remark Appendix B User and System SettingsSystem Setting Default DescriptionPattern Paper Disabling Auto switching a Paper Empty modeAppendix C Key Operator Information Eastman Kodak Company