Kodak 3000DSV-E manual Pattern Paper, Disabling Auto switching a Paper Empty mode

System Setting	Selection	Default		Description
Machine ID Printing	Disabled	Disabled	When two scanners are connected to one printer, this
(Printer mode only)	Pattern 1		function leaves an identification marker on the print so
	Pattern 2		the scanner used for the job can be determined after
			printing.
			Pattern 1	Pattern 2

			Paper	Paper
Cycle Print mode	Enabled	Disabled	This function automatically scans the next image
(Printer mode only)	Disabled		following a preset period of time (the period can be set
			by your Kodak Service Representative). Images are
			set by the user onto the carrier glass in between
			cycles.
Paper Size of Paper	Letter / A4	Letter / A4	Determines the desired paper size from the Paper
Feeding tray (Printer mode	portrait	portrait	Feeding tray of the printer. It is possible to feed the
only)	Letter / A4		following paper sizes and orientations into the printer:
	landscape		Inch values: Letter-portrait, Letter-landscape, Legal,
	Legal / A3		Ledger
	Legal / B4		Metric values: A4-portrait, A4-landscape, A3, B4, B5-
	B5 portrait		portrait, B5-landscape
	B5 landscape
Contrast setting	Lighter	Normal	To view subtle images with standard ranges of density
	Normal		clearly: Light (-1 to -7). To bring out the darker and
	Darker		lighter ranges of an image: Dark (+1 to +7).
The print function at the	Disable Print	Disable Print After a Toner Empty condition is detected, this function
time of Toner Empty	Enable Print		allows you to select either to stop printing or continue
detection (PR mode only)			printing.
Auto Film Format Select	Enable	Disable	The Auto Format Select Print function is enabled or
Print function (PR mode	Disable		disabled through the control panel.
only)
90 degree rotation setting	Enable	Disable	Enables the prism to rotate the screen image 90
	Disable		degrees.
Automatic paper source	Auto switching	Auto	Allows you to specify the paper source when same
switching	Disable Auto	switching	size paper is loaded into both the paper feeding tray
	switching		and paper feeding cassette.
			Auto switching: Printing continues by automatically
			switching to the remaining paper source after paper in
			the specified paper source runs out.
			Disabling Auto switching: A Paper Empty mode
			occurs and printing stops after paper in the specified
			paper source runs out. The paper source must be
			refilled or the paper source must be switched by
			pressing the Output Selection key in order to resume
			printing.

NOTE: To change any of the system settings described above, contact your Kodak Service Representative.

B-2 A-61371 September 2004