Kodak 3000DSV-E manual Power source Grounding, United States

Page 7

Power source

Grounding

The power source voltage requirements are as follows:

• Use a power source with minimal voltage fluctuation.

Power Source: 50Hz-60Hz

Voltage fluctuation: within ± 10%

Frequently fluctuation: within ± 3%

NOTE: If you are in doubt, call a qualified electrician.

The outlet should be located near the unit and be easily accessible so that the power cord can be unplugged immediately if necessary.

NEVER connect any other appliances or machines by means of a multiple socket to the outlet being used for the unit.

Make sure that the power cord and extension cord do not become caught in any mechanism of the system. Do not allow either the power or extension cord to become caught underneath the weight of the unit.

To prevent electrical shocks caused by electrical leakage, always ground the printer. Connect the grounding wire to:

In the United States:

Connect the grounding wire to:

-The ground terminal of the outlet.

-A grounding contact that complies with the local electrical standards.

A grounding contact that complies with the local electrical standards.

NEVER connect the grounding wire to a gas pipe, the grounding wire for a telephone, or a water pipe.

A-61371 September 2004

1-3

Image 7
Contents Operator’s Manual Safety Warnings Page Routine Precautions Introduction Product description Installation United States Power source GroundingScanner Space requirementsSystem Printer A3/A4 Laser Printer PC mode connected to a personal computer Printer mode connected to the A3/A4 Laser PrinterOperating environment Front view 3000DSV-E Scanner componentsRear view Auto-retrieval Controllers 3000DSV-E Scanner optional accessoriesFilm carriers Power On Turning the power on and offTo turn the power off Auto Power Save/ Projection Lamp functionsControl Panel Standard Control Panel and FunctionsPage Indicators Control Panel Shift Function Using the Shift function on the Control PanelControl Panel Page Black borders that run along the edges Image Processing featuresImage are masked Description Using the Scanner Film Scanning Size 11 x 17 A3 2 x 11 A4 3 x 8 1/2 Selecting a projection lensInstalling the projection lens 11 x 17 or A3 size 2 x 14 size 2 x 11 or A4 size Positioning the film imageVertical Horizontal Zooming in on the displayed image Zooming and focusing imagesFocusing the displayed image Rotating imagesPosi Positive film Selecting the film typeAuto Nega Negative filmSelecting the paper size Using the Auto Paper Selection functionPage-by-Page Selecting the Print PositionCenter LeftEntering a number from Using Auto ExposureUsing Manual Exposure Selecting the image densitySelecting Auto Masking Correcting a numberOperating Conditions for Auto Masking Manual Masking panels option Selecting Trimming Using Manual MaskingDefining an area Defining Page-by-Page Print Area Defining two separate areasCentering Using Centering and FitClearing a defined Print area Selecting MaskingUsing the Cycle Print Mode Specifying the interval between scanning operations Operating in the Cycle Print ModeValue Period seconds Registering the Job Program Connection mode Resolution DisplayUsing Electrical Zoom Skip of magnification 10 +Standard Adjusting screen illuminationClearing the Zoom magnification Paper sizeDisplay Function Description Changing settings with the User modeCorrecting Image Distortion Code Setting ValueSet Imprint mode Year, Month and Date Set modeCode Setting Value Parts of the printer Printer FunctionsUpper Unit Lock Release Lever  used to open the Upper Unit Page Capacity Loading paper into the paper feeding tray Loading paper into the paper cassette Replacing the toner cartridge Page Page Cleaning the Scanner screen MaintenanceOuter covers Carrier Glass option Replacing the projection lampPage Page Messages Troubleshooting/MessagesDisplay Code Description Other Malfunctions September Clearing misfeeds from the paper feeding tray Clearing a misfeed from the paper cassette Clearing a misfeed from inside the printer Page Symptom Solving printing problemsCause Action Kodak 3000DSV-E Digital Scanner-Printer Appendix a SpecificationsPC Mode SpecificationsA3/A4 Laser Printer Printer Mode Default Description Appendix B User and System SettingsUser Settings Initial Setting Remark System SettingPattern Paper Disabling Auto switching a Paper Empty modeAppendix C Key Operator Information Eastman Kodak Company