Other Malfunctions
Display | Code | Description |
---E1 The power to the printer is off or there is a problem with the connection of the interface cable to the printer. Turn on the printer or make sure that the interface cable is securely connected.
| E2 | The upper cover of the printer is not closed. Make |
|
| sure that it is completely closed. |
|
|
|
| PE | Paper Empty indicator: Lights up when the Printer |
|
| is not loaded with the paper size selected for use, or |
|
| when either the Paper Feeding Tray or Paper |
|
| Cassette has run out of paper with Auto (auto paper |
|
| selection) selected. |
|
|
|
PC | The Scanner is connected to the PC and ready for | |
|
| scanning by pressing the Start key. |
|
| This display is blinking when the Scanner is in |
|
| operation. |
| Pc | The Scanner is not connected to the PC. |
|
| • Turn on the PC or connect the Scanner to the PC |
|
| with the interface cable. |
|
|
|
| L1 | The lens is not mounted or is loose. |
|
| • Check the lens for correct installation and reinstall |
|
| it as necessary. |
|
|
|
| L2 | The Projection Lamp is burned out. |
|
| • Turn the power off and unplug the power cord from |
|
| the wall |
|
| only when unplugging the power cord. |
|
| • Replace the lamp. |
|
| If the lamp goes out during a print cycle, a blank |
|
| print may be output. |
Magnification warning display:
•You used the modification of the magnification by an electronic zoom.
•When a standard magnification is not selected, this symbol will be displayed.