Kodak 2100 manual Copying a photograph, Using the default settings to copy a photograph

KODAK ESP Office 2100 Series All-in-One Printer

Copying a photograph

You can copy a photograph using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a photograph

The default settings are either the factory default settings (see Resetting factory defaults, page 84), or defaults that you have set on the printer (see Save as Defaults, page 46).

To copy a photograph using the current default settings:

1.Place the original photograph face down on the scanner glass. IMPORTANT: Do not load photographs in the automatic document feeder (ADF).

2.Press Home.

3.Press to select Copy Photo.

4.Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.

Adjusting the settings and copying a photograph

To copy a photograph using settings other than the default settings:

1.Place the original photograph face down on the scanner glass. IMPORTANT: Do not load photographs in the automatic document feeder (ADF).

2.Press Home.

3.Press to select Copy Photo, then press OK.

4.Press to select an option, then press or to change the setting.

Copy Photo Option

Settings

Description

Quantity	1 (default) to 99	The number of copies that print.
Copy Size	2 x 3	The printer enlarges or reduces the
	3.5 x 5	original to make it the copy size you
	4 x 6 (default)	select.
		If the selected copy size is smaller
	4 x 7
		than the paper in the paper tray, the
	4 x 8
		printer automatically arranges the
	5 x 7
		pictures to best fit the paper size.
	4 x 12	Some cropping may occur if the image
	8 x 10	size and the selected print size are
	8.5 x 11 or A4	different.

www.kodak.com/go/aiosupport 45