NEC 42PD2, 50PD1 user manual Side View.... Terminal Board L/R, 11 RGB3 DVI 29pin, Remote Mini jack

Page 13

Side View.... Terminal Board L/R

10

11

12

13

14

Insert the prongs completely.

* for PLUGGABLE EQUIPMENT, tee

socket-outlet shall be installed near the

equipment and shall be easily accessible.

OUT	IN
	VIDEO
	S-VIDEO
	75Ω
	HIGH
	V
	H/CS
	B
	G
	R
	RGB2
RGB1
	AC-IN

15

16

17

18

10DIP SW

Sets the various modes of this unit.

11RGB3 (DVI 29pin)

IN connector: Inputs a digital RGB signal. (TMDS)

Note: This connector does not support analog input.

12REMOTE (Mini jack)

IN jack: This jack connects the wired remote control.

THROUGH OUT jack: Outputs as is the remote control signal that is connected to the REMOTE IN jack.

*This is used when operating multiple monitors (i.e., of this unit) with a single remote control.

13EXTERNAL CONTROL (mini D-Sub 15 pin) Controlled by the computer’s RS-232C interface.

IN connector: Used when operating this unit with EXTERNAL CONTROL from a personal computer. THROUGH OUT connector: Outputs as is the signal that is input to the EXTERNAL CONTROL IN connector.

14CONTROL LOCK

When “CONTROL LOCK” is set to “ON”, the buttons on the set’s front bezel control panel do not function.

15VIDEO

IN [BNC] connector (BNC): Inputs the video (composite video signal).

IN [S] connector (DIN 4 pin): Inputs the S video (Y/ C separate signal).

*When connections are made to both the BNC connector and the S video connector, the signal of the S video connector has priority.

THROUGH OUT [BNC] connector (BNC): Outputs the same signal connected to the VIDEO IN [BNC] THROUGH OUT [S] connector (DIN 4 pin): Outputs the same signal connector to the connector.

16RGB2 [R, G, B, H/CS, V] (BNC)

IN connector: Inputs the analog RGB signal.

The H/V composite signal is connected to the H/CS connector.

THROUGH OUT connector: Outputs as is the signal

input to the RGB2 IN connector.

75Ω/HIGH switch: This switch selects the impedance of the connector. It is usually used in the “75 Ω” position.

17RGB1 (mini D-Sub 15 pin)

IN connector: Inputs the analog RGB signal of a personal computer, etc.

18AC IN connector

Connects with the supplied power cable.

13

Image 13

Contents User’s Manual Important Information PrecautionsTo avoid damage and prolong operating life DOC avis de conformation PrécautionsMises en garde et précautions de sécurité Remarque What is Covered and What is not Covered Limited Warranty Plasma MonitorsContents Pulling Out and Reinserting the Retractable Feet Ventilation Requirements for en- closure mountingContents of the Package Features you’ll enjoy includeIntroduction Introduction to the PlasmaSync 42PD2/50PD1Connect the equipment Setup ProcedureHousing the Remote Control in the Remote Control Holder Attaching the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board CoverFront View Part Names and FunctionsSide View.... Terminal Board L/R AC in connector11 RGB3 DVI 29pin Remote Mini jackRemote Controller Battery Installation and Replacement Remote control transmitterVisual Normal button Raster Normal buttonOperating Range Using the wired remote control modeDIP Switch Functions and Settings Making the DIP Switch SettingsPower Management Modes Power Management FunctionMode Wiring Diagram InstallationConnecting Your VCR DVD or Laser Disc Player Connecting Your PC or Macintosh ComputerConnecting Your Document Camera Connections with Equipment that has a Digital InterfaceWhen using the RGB2 Input When using the Video inputsDaisy-chaining Your monitors Adjustment of the Display PowerOperation General ControlsAbout to Preset Raster Press Adjustment of the Display DirectAdjustment of the screen display position Adjustment display of the left/right positionAbout to Preset Visual Press Adjustment of the ImageList of Setting Details Adjustment of the DisplayMenu ControlSettings Before Making Adjustments Press the Visual Normal button or Raster Normal button About to Reset PressAutomatic Storage Brightness Contrast Sharpness Color Tint GAMMA2 Adjustment of the Image Visual ControlsAlign the cursor with icon Return to the main menuPosition Width Adjustment of Screen Position HorizontalAlign the cursor with the desired item Position Height Adjustment of Screen Position VerticalColor Temp Color Temperature Color TempColor Temp High LOW User Align the cursor with Color Temp and set with the / buttonsGain White Level Bias Black Level Adjustment of the White BalanceExiting the adjustment Adjustment of the On-screen Display PositionOSM H-POS OSM V-POS OSM Angle OSM Display Time OSM H-POS OSM V-POS OSM Angle OSM Display Time Seconds Setting the On-screen Display OFF TimeAdjustment of the Clock Frequency/Clock Phase RGB Mode StillInput Mode 4 X 3 / 16 X NormalClock phase adjustment Fine Picture RGB ModeSource Info RGB1 ALL Visual Normal ALL Raster Normal ALL NormalPOL.NEG POL.POS When RGB input is selected Source RGB1, RGB2, RGB3 Source Info Video Mode NtscWhen video input is selected Information ScreenTimer Screen SET Timer OFFPresent Time Program Menu Date on OFF Mode SET Timer on Press Proceed for Program MenuAuto Timer Screen Direct Daily WeeklyCursor movement Setting Position Driver NO.1 Setting Position DriverMultiple Screens Align the cursor with icon 12 on the secondColor System Other Setting ScreensAlign the cursor with icon 13 of the second Press the / buttons and setGray Level SET ID no RGB3 ADJ ALL ResetBurning reduction function ID Selection Screen SET no256 Symptom Checks Remedy TroubleshootingPlasmaSync 42PD2 Model PX-42VP2A SpecificationsPlasmaSync 50PD1 Model PX-50VP1A Appendix Signal Identification For Raster PresetRGB Connections ApplicationCommunication Format Communication ParametersPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm