NEC 50PD1, 42PD2, 42PD2, 50PD1 user manual Specifications, PlasmaSync 42PD2 Model PX-42VP2A

Page 48

Specifications

PlasmaSync 42PD2 (Model PX-42VP2A)

	Plasma Screen	42 inch Visual size (Diagonal), AC Drive type
		Aspect ratio : 16:9
		Optical filter coating
		Display color : 16,770,000 colors 256 levels
	RGB Input Terminals	RGB 1	:	mini D-SUB 15pin
		RGB 2	:	BNC (R,G,B, H/CS and V)
		RGB 3	:	Digital RGB (DVI 24+5pin: Not compatible with analog input.
				Complies with DVI
		Video	:	Analog 0.7Vp-p/75 Ohms (Positive)
			:	Sync.	: Separate Sync. TTL level, 0.7 - 4.0Vp-p/75 Ohms				BNC only
					Horizontal Sync.			(Positive/Negative)
					Vertical Sync.			(Positive/Negative)
			: Composite Sync. TTL Level					(Positive/Negative)
			: Composite Sync. On Green Video 0.3Vp-p (Negative)

	RGB Output Terminals	BNC (R,G,B, H/CS and V)
	THROUGH OUT	RGB THROUGHOUT (RGB2 only)

	Video Input Terminals	1.0Vp-p, 75 Ohms unbalanced (BNC-Jack), Composite video signal, Sync-negative.
	VIDEO	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
	S-VIDEO	C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	Video Output Terminals
	THROUGH OUT	1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative.
	THROUGH OUT (S-VIDEO)	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
		C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	External Control	mini D-SUB 15pin (IN/THROUGH OUT)
	(IN/THROUGH OUT)	Open/Short, RS-232C Control
	Synchronization Range	Horizontal : 15.5 to 68.7 KHz (automatic : step scan)
		Vertical : 46.0 to 85.0 Hz (automatic : step scan)
	Maximum Resolution	RGB : 853( H) X			480(V) pixels

	Power Supply	100-120 VAC, 50/60 Hz

	Current Rating	5.6A (maximum)
	Power consumption	430W (typical)
	Dimensions	39.3(W) x 23.4(H) x 4.5(D) inches / 998(W) X 595(H) X114(D) mm
	Weight	72.7lbs/33kg
	Environmental Considerations	Operating Temperature				:	0to 40
					Humidity	:	20 to 80%
					Altitude	:	0 to 6233 feet(1900m)
		Storage Temperature				:	-10 to 50
					Humidity	:	10 to 90%
					Altitude	:	0 to 9842 feet(3000m)

	Regulations :	UL/C-ULApproved (UL 1950/CSA 950)
		DOC Canada requirements
		Meets FCC class A requirements

All specifications are subject to change without notice.

48

Image 48

Contents User’s Manual Precautions Important InformationTo avoid damage and prolong operating life Précautions DOC avis de conformationMises en garde et précautions de sécurité Remarque Limited Warranty Plasma Monitors What is Covered and What is not CoveredContents Ventilation Requirements for en- closure mounting Pulling Out and Reinserting the Retractable FeetFeatures you’ll enjoy include Contents of the PackageIntroduction Introduction to the PlasmaSync 42PD2/50PD1Setup Procedure Connect the equipmentAttaching the Remote Control Holder Housing the Remote Control in the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board CoverPart Names and Functions Front ViewAC in connector Side View.... Terminal Board L/R11 RGB3 DVI 29pin Remote Mini jackRemote Controller Remote control transmitter Battery Installation and ReplacementVisual Normal button Raster Normal buttonUsing the wired remote control mode Operating RangeMaking the DIP Switch Settings DIP Switch Functions and SettingsPower Management Function Power Management ModesMode Installation Wiring DiagramConnecting Your PC or Macintosh Computer Connecting Your VCR DVD or Laser Disc PlayerConnecting Your Document Camera Connections with Equipment that has a Digital InterfaceWhen using the Video inputs When using the RGB2 InputDaisy-chaining Your monitors Power Adjustment of the DisplayOperation General ControlsAdjustment of the Display Direct About to Preset Raster PressAdjustment of the screen display position Adjustment display of the left/right positionAdjustment of the Image About to Preset Visual PressAdjustment of the DisplayMenu Control List of Setting DetailsSettings Before Making Adjustments About to Reset Press Press the Visual Normal button or Raster Normal buttonAutomatic Storage Adjustment of the Image Visual Controls Brightness Contrast Sharpness Color Tint GAMMA2Align the cursor with icon Return to the main menuAdjustment of Screen Position Horizontal Position WidthAlign the cursor with the desired item Adjustment of Screen Position Vertical Position HeightColor Temperature Color Temp Color TempColor Temp High LOW User Align the cursor with Color Temp and set with the / buttonsAdjustment of the White Balance Gain White Level Bias Black LevelAdjustment of the On-screen Display Position Exiting the adjustmentOSM H-POS OSM V-POS OSM Angle OSM Display Time Setting the On-screen Display OFF Time OSM H-POS OSM V-POS OSM Angle OSM Display Time SecondsRGB Mode Still Adjustment of the Clock Frequency/Clock PhaseInput Mode 4 X 3 / 16 X NormalRGB Mode Clock phase adjustment Fine PictureALL Visual Normal ALL Raster Normal ALL Normal Source Info RGB1POL.NEG POL.POS Source Info Video Mode Ntsc When RGB input is selected Source RGB1, RGB2, RGB3When video input is selected Information ScreenSET Timer OFF Timer ScreenPresent Time SET Timer on Press Proceed for Program Menu Program Menu Date on OFF ModeAuto Timer Screen Direct Daily WeeklyCursor movement Setting Position Driver Setting Position Driver NO.1Multiple Screens Align the cursor with icon 12 on the secondOther Setting Screens Color SystemAlign the cursor with icon 13 of the second Press the / buttons and setRGB3 ADJ ALL Reset Gray Level SET ID noBurning reduction function SET no ID Selection Screen256 Troubleshooting Symptom Checks RemedySpecifications PlasmaSync 42PD2 Model PX-42VP2APlasmaSync 50PD1 Model PX-50VP1A Signal Identification For Raster Preset AppendixRGB Application ConnectionsCommunication Parameters Communication FormatPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm