Appendix
Signal Identification For Raster Preset
|
| Resolution |
| Factory | User | Sync polarity | Presence/absence of sync | RGB | INPUT | ||
|
| (horizontal frequency/vertical frequency) | settings | settings | Hor | Ver | Hor | Ver | MODE | MODE*7 | |
VIDEO NTSC*1 |
| ○ | ○ | - | - |
|
| - | - | ||
VIDEO PAL*1 VIDEO SECAM*1 |
| ○ | ○ | - | - |
|
| - | - | ||
640 | X 240 | (15.734kHz/59.94Hz) | ○ | ○ | NEG | NEG | Y | Y | - | 4 X 3 | |
|
|
|
|
|
|
|
|
|
|
|
|
768 | X 288 | (15.557kHz/50.39Hz) | ○ | ○ | NEG | NEG | Y | Y | - | - | |
640 | X 400 | (31.469kHz/70.086Hz) | IBM 400@70Hz*3 | ○ | ○ | NEG | NEG | Y | Y | - | - |
|
|
|
|
|
|
|
|
|
|
|
|
640 | X 480 | (31.469kHz/59.94Hz) | VESA 480@60Hz | ○ | ○ | NEG | NEG | Y | Y | STILL | 4 X 3 |
640 | X 480 | (35kHz/66.667Hz) | MAC @13''*6 | ○ | ○ | - | - | - | - | - | - |
640 | X 480 | (37.861kHz/72.809Hz) | VESA 480@72Hz | ○ | ○ | NEG | NEG | Y | Y | - | - |
640 | X 480 | (37.5kHz/75Hz) | VESA 480@75Hz | ○ | ○ | NEG | NEG | Y | Y | - | - |
|
|
|
|
|
|
|
|
|
|
|
|
640 | X 480 | (43.269kHz/85.008Hz) | VESA 480@85Hz*4 | ○ | ○ | POS | POS | Y | Y | - | - |
640 | X 480 | (39.375kHz/75Hz) | ○ | ○ | NEG | NEG | Y | Y | - | - | |
|
|
|
|
|
|
|
|
|
|
|
|
800 | X 600 | (35.156kHz/56.25Hz) | VESA 600@56Hz | ○ | ○ | POS | POS | Y | Y | - | - |
800 | X 600 | (37.879kHz/60.31Hz) | VESA 600@60Hz | ○ | ○ | POS | POS | Y | Y | - | - |
800 | X 600 | (48.077kHz/72.188Hz) | VESA 600@72Hz | ○ | ○ | POS | POS | Y | Y | - | - |
800 | X 600 | (46.875kHz/75Hz) | VESA 600@75Hz | ○ | ○ | POS | POS | Y | Y | - | - |
|
|
|
|
|
|
|
|
|
|
|
|
800 | X 600 | (53.674kHz/85.061Hz) | VESA 600@85Hz*4 | ○ | ○ | POS | POS | Y | Y | - | - |
832 | X 624 | (49.725kHz/74.55Hz) | MAC @16''*6 | ○ | ○ | - | - | - | - | - | - |
|
|
|
|
|
|
|
|
|
|
|
|
852 | X 480 | (31.722kHz/59.966Hz) | I/O data wide*5 | ○ | ○ | NEG | NEG | Y | Y | - | 16 X 9 |
848 | X 480 | (31.02kHz/60Hz) | VGA WIDE (NEC1) | ○ | ○ | POS | POS | Y | Y | - | - |
1024 X 768 (56.476kHz/70.069Hz) | VESA 768@70Hz | ○ | ○ | NEG | NEG | Y | Y | - | - | ||
1024 X 768 (60.023kHz/75.029Hz) | VESA 768@75Hz | ○ | ○ | POS | POS | Y | Y | - | - | ||
|
|
|
|
|
|
|
|
|
| ||
1024 X 768 (68.677kHz/84.997Hz) | VESA 768@85Hz*4 | ○ | ○ | POS | POS | Y | Y | - | - | ||
1024 X 768 (60.24kHz/74.93Hz) | MAC @19''*6 | ○ | ○ | - | - | - | - | - | - | ||
|
|
|
|
|
|
|
|
|
|
|
|
768 | X 576 | (31.389kHz/50Hz) | ○ | ○ | NEG | NEG | Y | Y | - | - | |
640 X 480 | (31.47kHz/59.9Hz) | ○ | ○ | NEG | NEG | Y | Y | MOTION | 4 X 3 | ||
*1 Convert to 640 dots x 480 lines and display.
*2 These signals cannot be displayed in the RGB3 input mode.
*3 Display only 400 lines with the screen center of the vertical orientation located at the center.
*4 The picture will be shaky when the moving images of video games, etc., are input. (In this case set the refresh rate to 75 kHz or less.) *5 Only when using an I/O DATA graphic accelerator board.
*6 Use a separately sold signal adapter (mini
*7 Make the settings to display these signals. The signals will not be displayed properly unless the correct settings are made.
*The resolution deteriorates in comparison with the original image because the image of 640 dots x 480 lines is converted to 853 dots x 480 lines and displayed. *At the time of video input, video signals derived from poor recording conditions may give rise to a disturbed screen image.
*The sync may be disturbed when non standard signals other than the aforementioned are input.
*Multiple screens (2 screens) can only display signals having an aspect ratio of 4:3. *3 Cannot be used with multiple screens. *With digital inputs some signals are not accepted.
*852 dot by 480 line signals are displayed with this resolution.
*848 dot by 480 line signals are displayed at a resolution of 848 dots by 480 lines when “NORMAL” is selected, and converted to 853 dots by 480 lines when “FULL” is selected.
50