NEC 42PD2, 50PD1, 50PD1, 42PD2 Gain White Level Bias Black Level, Adjustment of the White Balance

Page 33

Adjustment of the White Balance

This adjusts the white balance of bright images (Gain) and dark images (Bias).

1.Align the cursor with icon (4)

The cursor is moved left and right with the POSITION CONTROL◀ / ♣ buttons.

Color temperature adjustment screen

Icon (4)

COLOR TEMP

2.After selecting COLOR TEMP, align the cursor with USER and press the PROCEED button.

The cursor is moved left and right with the POSITION CONTROL ◀ / ♣ buttons.

PROCEED

COLOR TEMP

HIGH LOW USER

PRESS 'PROCEED' FOR

GAIN / BIAS

SETTING

3.Align the cursor with Gain or Bias of the sub menu, then make the adjustment with the ◀ / ♣ buttons while watching the screen.

	POSITION / CONTROL
Move up								Becomes stronger
Move up
Becomes weaker
Becomes weaker
							Move down
							Move down

R-GAIN (WHITE LEVEL)

G-GAIN (WHITE LEVEL)

B-GAIN (WHITE LEVEL)

R-BIAS (BLACK LEVEL)

G-BIAS (BLACK LEVEL)

B-BIAS (BLACK LEVEL)

4.Return to the main menu

EXIT

*To reset the adjustment value, press the VISUAL NORMAL button before pressing the EXIT button.

*To delete the main menu, press the EXIT button once more.

33

Image 33

Contents User’s Manual Important Information PrecautionsTo avoid damage and prolong operating life Précautions DOC avis de conformationMises en garde et précautions de sécurité Remarque What is Covered and What is not Covered Limited Warranty Plasma MonitorsContents Pulling Out and Reinserting the Retractable Feet Ventilation Requirements for en- closure mountingContents of the Package Features you’ll enjoy includeIntroduction Introduction to the PlasmaSync 42PD2/50PD1Connect the equipment Setup ProcedureHousing the Remote Control in the Remote Control Holder Attaching the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board CoverFront View Part Names and FunctionsSide View.... Terminal Board L/R AC in connector11 RGB3 DVI 29pin Remote Mini jackRemote Controller Battery Installation and Replacement Remote control transmitterVisual Normal button Raster Normal buttonOperating Range Using the wired remote control modeDIP Switch Functions and Settings Making the DIP Switch SettingsPower Management Function Power Management ModesMode Wiring Diagram InstallationConnecting Your VCR DVD or Laser Disc Player Connecting Your PC or Macintosh ComputerConnecting Your Document Camera Connections with Equipment that has a Digital InterfaceWhen using the Video inputs When using the RGB2 InputDaisy-chaining Your monitors Adjustment of the Display PowerOperation General ControlsAbout to Preset Raster Press Adjustment of the Display DirectAdjustment of the screen display position Adjustment display of the left/right positionAbout to Preset Visual Press Adjustment of the ImageList of Setting Details Adjustment of the DisplayMenu ControlSettings Before Making Adjustments About to Reset Press Press the Visual Normal button or Raster Normal buttonAutomatic Storage Brightness Contrast Sharpness Color Tint GAMMA2 Adjustment of the Image Visual ControlsAlign the cursor with icon Return to the main menuAdjustment of Screen Position Horizontal Position WidthAlign the cursor with the desired item Position Height Adjustment of Screen Position VerticalColor Temp Color Temperature Color TempColor Temp High LOW User Align the cursor with Color Temp and set with the / buttonsGain White Level Bias Black Level Adjustment of the White BalanceAdjustment of the On-screen Display Position Exiting the adjustmentOSM H-POS OSM V-POS OSM Angle OSM Display Time OSM H-POS OSM V-POS OSM Angle OSM Display Time Seconds Setting the On-screen Display OFF TimeAdjustment of the Clock Frequency/Clock Phase RGB Mode StillInput Mode 4 X 3 / 16 X NormalClock phase adjustment Fine Picture RGB ModeALL Visual Normal ALL Raster Normal ALL Normal Source Info RGB1POL.NEG POL.POS When RGB input is selected Source RGB1, RGB2, RGB3 Source Info Video Mode NtscWhen video input is selected Information ScreenSET Timer OFF Timer ScreenPresent Time Program Menu Date on OFF Mode SET Timer on Press Proceed for Program MenuAuto Timer Screen Direct Daily WeeklyCursor movement Setting Position Driver NO.1 Setting Position DriverMultiple Screens Align the cursor with icon 12 on the secondColor System Other Setting ScreensAlign the cursor with icon 13 of the second Press the / buttons and setRGB3 ADJ ALL Reset Gray Level SET ID noBurning reduction function SET no ID Selection Screen256 Symptom Checks Remedy TroubleshootingPlasmaSync 42PD2 Model PX-42VP2A SpecificationsPlasmaSync 50PD1 Model PX-50VP1A Appendix Signal Identification For Raster PresetRGB Connections ApplicationCommunication Format Communication ParametersPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm