Operating Range
*Use the remote controller within a distance of about 7 m
/ 23ft. from the front of the monitor's remote control sen- sor and at a horizontal angle of within 30°.
*The remote control operation may not function if the monitor's remote control sensor is exposed to direct sun- light or strong artificial light, or if there is an obstacle between the sensor and the remote control unit.
Using the wired remote control mode
Connect the included remote control cable to the remote
control's remote jack and "REMOTE IN" jack on the
monitor.
When the cable is connected, the mode automatically
switches to wired remote control.
When the wired remote control mode is used, the remote
control unit can be operated even if no batteries are loaded.
Note:
When you connect a remote control cable to this moni- tor , attach the supplied ferrite core. If you do not do this, this monitor will not conform to mandatory FCC standards. (42PD2 only)
Note:
Do not connect the wired remote control to the REMOTE THROUGH OUT jack. If doing so, the remote control does not work.
Approx.
7m/23ft
30˚ 30˚
POWER OFF | POWER ON |
RGB 2 | |
RGB 1 | RGB 3 |
VIDEO | |
POSITION / CONTR OL | |
EXIT | PROCEED |
RGB/VIDEO
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
VISUAL | RASTER |
NORMAL | NORMAL |
ID SELECT | CLEAR |
Remote Control Cable
To Remote Jack
POWER OFF | POWER ON |
RGB 2 | |
RGB 1 | RGB 3 |
VIDEO | |
POSITION / CONTR OL | |
EXIT | PROCEED |
RGB/VIDEO
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
VISUAL | RASTER |
NORMAL | NORMAL |
ID SELECT | CLEAR |
16