NEC 50PD1, 42PD2 Color System, Other Setting Screens, Align the cursor with icon 13 of the second

Page 44

Other Setting Screens (1)

This allows the following settings: WIDE MODE, COLOR SYSTEM, RGB MODE, POWER ON MODE, POWER MANAGER, EXTERNAL CONTROL, HDTV SELECT, and ALL RESET.

1.Align the cursor with icon (13) of the second page.

The cursor is moved left and right with the POSITION CONTROL◀ / ♣ buttons.

Other Setting Screens (1)

Icon (13)

COLOR SYSTEM

: AUTO

POWER ON MODE

: LAST MEM

POWER MANAGER : OFF

EXTERNAL CONTROL : OFF

ALL RESET

2. Align the cursor with the desired item

POSITION / CONTROL

Move up

Move down

COLOR SYSTEM

:

AUTO

POWER ON MODE

: LAST MEM

POWER MANAGER : OFF

EXTERNAL CONTROL : OFF

ALL RESET

3.Press the ◀ / ♣ buttons and set

*The ◀ / ♣ buttons are used to switch the various items in toggle fashion as described below.

*COLOR SYSTEM:

AUTO/3.58 NTSC/PAL/SECAM/4.43 NTSC (Initial value: AUTO)

*POWER ON MODE:

LAST MEM/VIDEO/RGB1/RGB2/RGB3 (Initial value: LAST MEM (Last Memory))

*POWER MANAGER:

This means Power management of RGB input ON/OFF (Initial value is OFF)

*EXTERNAL CONTROL: OFF/1/2 (Initial value is OFF) RS-232C can be used when “1” selected.

Open/Short control can be used when “2” is selected.

4.Return to the main menu

EXIT

* To delete the main menu, press the EXIT button once more.

44

Image 44

Contents User’s Manual Precautions Important InformationTo avoid damage and prolong operating life Mises en garde et précautions de sécurité PrécautionsDOC avis de conformation Remarque Limited Warranty Plasma Monitors What is Covered and What is not CoveredContents Ventilation Requirements for en- closure mounting Pulling Out and Reinserting the Retractable FeetFeatures you’ll enjoy include Contents of the PackageIntroduction Introduction to the PlasmaSync 42PD2/50PD1Setup Procedure Connect the equipmentAttaching the Remote Control Holder Housing the Remote Control in the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board CoverPart Names and Functions Front ViewAC in connector Side View.... Terminal Board L/R11 RGB3 DVI 29pin Remote Mini jackRemote Controller Remote control transmitter Battery Installation and ReplacementVisual Normal button Raster Normal buttonUsing the wired remote control mode Operating RangeMaking the DIP Switch Settings DIP Switch Functions and SettingsMode Power Management FunctionPower Management Modes Installation Wiring DiagramConnecting Your PC or Macintosh Computer Connecting Your VCR DVD or Laser Disc PlayerConnecting Your Document Camera Connections with Equipment that has a Digital InterfaceDaisy-chaining Your monitors When using the Video inputsWhen using the RGB2 Input Power Adjustment of the DisplayOperation General ControlsAdjustment of the Display Direct About to Preset Raster PressAdjustment of the screen display position Adjustment display of the left/right positionAdjustment of the Image About to Preset Visual PressAdjustment of the DisplayMenu Control List of Setting DetailsSettings Before Making Adjustments Automatic Storage About to Reset PressPress the Visual Normal button or Raster Normal button Adjustment of the Image Visual Controls Brightness Contrast Sharpness Color Tint GAMMA2Align the cursor with icon Return to the main menuAlign the cursor with the desired item Adjustment of Screen Position HorizontalPosition Width Adjustment of Screen Position Vertical Position HeightColor Temperature Color Temp Color TempColor Temp High LOW User Align the cursor with Color Temp and set with the / buttonsAdjustment of the White Balance Gain White Level Bias Black LevelOSM H-POS OSM V-POS OSM Angle OSM Display Time Adjustment of the On-screen Display PositionExiting the adjustment Setting the On-screen Display OFF Time OSM H-POS OSM V-POS OSM Angle OSM Display Time SecondsRGB Mode Still Adjustment of the Clock Frequency/Clock PhaseInput Mode 4 X 3 / 16 X NormalRGB Mode Clock phase adjustment Fine PicturePOL.NEG POL.POS ALL Visual Normal ALL Raster Normal ALL NormalSource Info RGB1 Source Info Video Mode Ntsc When RGB input is selected Source RGB1, RGB2, RGB3When video input is selected Information ScreenPresent Time SET Timer OFFTimer Screen SET Timer on Press Proceed for Program Menu Program Menu Date on OFF ModeAuto Timer Screen Direct Daily WeeklyCursor movement Setting Position Driver Setting Position Driver NO.1Multiple Screens Align the cursor with icon 12 on the secondOther Setting Screens Color SystemAlign the cursor with icon 13 of the second Press the / buttons and setBurning reduction function RGB3 ADJ ALL ResetGray Level SET ID no 256 SET noID Selection Screen Troubleshooting Symptom Checks RemedySpecifications PlasmaSync 42PD2 Model PX-42VP2APlasmaSync 50PD1 Model PX-50VP1A Signal Identification For Raster Preset AppendixRGB Application ConnectionsCommunication Parameters Communication FormatPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm