NEC 42PD2, 50PD1 user manual Setting Position Driver NO.1, Multiple Screens, Screen selection

Page 43

Multiple Screens

Select the screen mode from among 1 or 4 screens. (Normally 1 is selected.)

VIDEO WALL can be achieved from two or four screens with the sole use of the main unit.

For information about compatible signals, see the Signal

Preset Table of factory setting values on Page 49.

1.Align the cursor with icon (12) on the second page

The cursor is moved left and right with the POSITION CONTROL◀ / ♣ buttons.

Multiple Screens

Icon (12)

VIDEO WALL MENU 1. SCREEN DIVIDER

SETTING : 1

2. POSITION OF

DRIVER :

2.Align the cursor using ▲ / ▼ buttons with the SCREEN DIVIDER SETTING and use the ◀ / ♣ buttons to select 1 screen or 4 screens.

Use the left and right cursors to change the setting between 1 → 4 → in toggle fashion. (The initial value

is 1.)

POSITION / CONTROL

3.Align the cursor with POSITION OF SETTING and set with the ◀ / ♣ buttons.

Nothing will be displayed when “1” is selected in the

SCREEN WALL MENU.

When “4” is selected, the icon of the right screen is displayed.

Use the right cursor button to go clockwise and select screen 1 from among the 4 screens. Set the number to “1” at the upper left, and display “1 to 4” going clockwise.

There is no selection for the initial value.

VIDEO WALL MENU 1. SCREEN DIVIDER

SETTING : 4

2. POSITION OF

DRIVER : NO.1

4.Return to the main menu

EXIT

*To delete the main menu, press the EXIT button once more.

Move up

Screen selection:

4 Screens

Move down

No.1

No.2

No.4

No.3

43

Image 43

Contents User’s Manual Important Information PrecautionsTo avoid damage and prolong operating life DOC avis de conformation PrécautionsMises en garde et précautions de sécurité Remarque What is Covered and What is not Covered Limited Warranty Plasma MonitorsContents Pulling Out and Reinserting the Retractable Feet Ventilation Requirements for en- closure mountingIntroduction to the PlasmaSync 42PD2/50PD1 Features you’ll enjoy includeContents of the Package IntroductionConnect the equipment Setup ProcedureRemoving the Terminal Board Cover Attaching the Remote Control HolderHousing the Remote Control in the Remote Control Holder Opening the Terminal Board CoverFront View Part Names and FunctionsRemote Mini jack AC in connectorSide View.... Terminal Board L/R 11 RGB3 DVI 29pinRemote Controller Raster Normal button Remote control transmitterBattery Installation and Replacement Visual Normal buttonOperating Range Using the wired remote control modeDIP Switch Functions and Settings Making the DIP Switch SettingsPower Management Modes Power Management FunctionMode Wiring Diagram InstallationConnections with Equipment that has a Digital Interface Connecting Your PC or Macintosh ComputerConnecting Your VCR DVD or Laser Disc Player Connecting Your Document CameraWhen using the RGB2 Input When using the Video inputsDaisy-chaining Your monitors General Controls PowerAdjustment of the Display OperationAdjustment display of the left/right position Adjustment of the Display DirectAbout to Preset Raster Press Adjustment of the screen display positionAbout to Preset Visual Press Adjustment of the ImageList of Setting Details Adjustment of the DisplayMenu ControlSettings Before Making Adjustments Press the Visual Normal button or Raster Normal button About to Reset PressAutomatic Storage Return to the main menu Adjustment of the Image Visual ControlsBrightness Contrast Sharpness Color Tint GAMMA2 Align the cursor with iconPosition Width Adjustment of Screen Position HorizontalAlign the cursor with the desired item Position Height Adjustment of Screen Position VerticalAlign the cursor with Color Temp and set with the / buttons Color Temperature Color TempColor Temp Color Temp High LOW UserGain White Level Bias Black Level Adjustment of the White BalanceExiting the adjustment Adjustment of the On-screen Display PositionOSM H-POS OSM V-POS OSM Angle OSM Display Time OSM H-POS OSM V-POS OSM Angle OSM Display Time Seconds Setting the On-screen Display OFF TimeNormal RGB Mode StillAdjustment of the Clock Frequency/Clock Phase Input Mode 4 X 3 / 16 XClock phase adjustment Fine Picture RGB ModeSource Info RGB1 ALL Visual Normal ALL Raster Normal ALL NormalPOL.NEG POL.POS Information Screen Source Info Video Mode NtscWhen RGB input is selected Source RGB1, RGB2, RGB3 When video input is selectedTimer Screen SET Timer OFFPresent Time Direct Daily Weekly SET Timer on Press Proceed for Program MenuProgram Menu Date on OFF Mode Auto Timer ScreenCursor movement Align the cursor with icon 12 on the second Setting Position DriverSetting Position Driver NO.1 Multiple ScreensPress the / buttons and set Other Setting ScreensColor System Align the cursor with icon 13 of the secondGray Level SET ID no RGB3 ADJ ALL ResetBurning reduction function ID Selection Screen SET no256 Symptom Checks Remedy TroubleshootingPlasmaSync 42PD2 Model PX-42VP2A SpecificationsPlasmaSync 50PD1 Model PX-50VP1A Appendix Signal Identification For Raster PresetRGB Connections ApplicationCommunication Format Communication ParametersPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm