Appendix –continued
Tag6 | Color Control | Color Control Systems: Six color presets select the desired colour setting (sRGB, |
|
| NATIVE and PROGRAMMABLE color presets are standard and cannot be changed). |
|
| Color temperature increases or decreases, in each preset. |
|
| R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and |
|
| Saturation depending upon which is selected. The change in color will appear on screen |
|
| and the direction (increase or decrease) will be shown by the color bars. |
|
| NATIVE: Original color presented by the LCD panel that is unadjustable. |
|
| PROGRAMMABLE: The color temperature and tone that were set up with the |
|
| downloaded application software are reflected. |
|
|
|
Tag7 | Sharpness | This is a digital capability for keeping a crisp image at all signal timings. It continuously |
|
| adjusts to maintain a distinct or soft image as you prefer, and is set independently |
|
| according to different timings. |
|
| The number of adjustment steps is different depending on whether the mode is OFF, |
|
| FULL or ASPECT (1600 x 1200 is OFF Mode). Press Ò+Ó or |
|
|
|
| Expansion Mode | Sets the zoom method. |
|
| FULL: The image is expanded to 1600 x 1200, regardless of the resolution. |
|
| ASPECT: The image is expanded without changing the aspect ratio. |
|
| OFF: The image is not expanded. |
|
| CUSTOM (Digital input and Resolution of 1600 x 1200 only): |
|
| Select one of nine expansion rates. In this mode, the resolution may be low and there |
|
| may be blank areas. This mode is for use with special video cards. |
|
| Press ÒSELECTÓ to move the select menu, and press Ò+Ó or |
|
|
|
| Video Detect | Selects the method of video detection when more than one computer is connected. |
|
| Press Ò+Ó or |
|
| FIRST DETECT: The video input has to be switched to ÒFIRST DETECTÓ mode. When |
|
| current video input signal is not present, then the monitor searches for a video signal from |
|
| the other video input port. If the video signal is present in the other port, then the monitor |
|
| switches the video source input port to the new found video source automatically. The |
|
| monitor will not look for other video signals while the current video source is present. |
|
| LAST DETECT: The video input has to be switched to the ÒLAST DETECTÓ mode. When |
|
| the monitor is displaying a signal from the current source and a new secondary source is |
|
| supplied to the monitor, then the monitor will automatically switch to the new video source. |
|
| When current video input signal is not present, then the monitor searches for a video |
|
| signal from the other video input port. If the video signal is present in the other port, then |
|
| the monitor switches the video source input port to the new found video source automatically. |
|
| NONE: The Monitor will not search the other video input port unless the monitor is turned on. |
|
|
|
| DVI Selection | This function selects the DVI input mode (Input 1). When the DVI selection has been |
|
| changed, you must restart your computer. Press Ò+Ó or |
|
| AUTO: By using the |
|
| By using the |
|
| DIGITAL: DVI digital input is available. |
|
| ANALOG: DVI analog input is available. |
|
|
|
| Off Timer | Monitor will automatically |
|
| amount of time. |
|
|
|
| Language | OSM control menus are available in seven languages. Press Ò+Ó or |
|
|
|
| OSM Position | You can choose where you would like the OSM control image to appear on your screen. |
|
| Selecting OSM Location allows you to manually adjust the position of the OSM control |
|
| menu left, right, down or up. Press ÒSELECTÓ to move the adjustment menu, and press |
|
| Ò+Ó or |
|
|
|
| OSM Turn off | The OSM control menu will stay on as long as it is in use. In the OSM Turn Off submenu, |
|
| you can select how long the monitor waits after the last touch of a button to close the |
|
| OSM control menu. The preset choices are |
|
| Press Ò+Ó or |
|
|
|
51
LCD2180UXManual1020.p65 | 51 | 10/21/03, 9:11 AM |