Lexmark 47B1001, 47B1000, X792DTE, X792DE manual Disabling the USB buffer

Page 8

8

3Verify that the MFP is in Configuration mode by locating the Exit Config Menu icon in the lower right corner of the touch screen.

4Scroll through the configuration menus to locate the Disk Encryption menu selection.

5Touch Disk Encryption > Enable.

Warning: Enabling disk encryption will erase the contents of the hard disk.

6 The following message appears: Contents will be lost. Continue?

•Touch Yes to proceed with disk wiping and encryption. A status bar will indicate the progress of the encryption task. Disk encryption can take several hours to complete.

After the disk has been encrypted, the MFP will return to the Enable/Disable screen.

Warning: Do not turn off the device during the encryption process. Doing so may result in loss of data.

7Touch Back, and then touch Exit Config Menu.

The MFP will undergo a power‑on reset, and then return to normal operating mode.

Disabling the USB buffer

Disabling the USB buffer disables the USB host port on the back of the device.

1From the home screen, touch > Network/Ports > Standard USB.

2Set USB Buffer to Disabled.

3Touch Submit.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Supplement and Administrator Guide NovemberUnited States Government Rights Contents Troubleshooting Login issuesUsing this guide Overview and first stepsOverview Supported devicesPage Attaching a lock Encrypting the hard diskFollowing message appears Contents will be lost. Continue? Disabling the USB bufferInstalling the minimum configuration Configuring the deviceConfiguration checklist Configuring disk wipingScenario 1 Using two groups Scenario 2 Using multiple groupsCreating user accounts Defining groupsSelect Manage Internal Accounts Add Entry Creating security templatesCreating accounts Modifying or deleting an existing security template Controlling access to device functionsAccess controls and required levels of protection Access control Level of protection Disabling home screen icons Touch Home screen customizationAdministering the device Using the Embedded Web ServerSettings for network-connected devices Printing a network setupCreating a new certificate Viewing, downloading, and deleting a certificateClick Device Certificate Management New Click Generate New CertificateSetting up IPSec Installing a CA certificateDisabling the AppleTalk protocol Using the EWSUsing the touch screen Kerberos Other settings and functionsNetwork Time Protocol Importing a Kerberos configuration file Security audit loggingUsing the touch screen Smtp settings MailSet E‑mail images sent as to Attachment Touch Fax Send Settings FaxUser access Configuring security reset jumper behaviorSetting up a fax storage location optional Creating user accounts through the EWSScenario 2 Creating groups based on device function Click Setup groups for use with internal accountsScenario 1 Creating groups based on department Configuring LDAP+GSSAPI Click Settings Security Security Setup Internal AccountsClick Add an LDAP+GSSAPI Setup General InformationSearch specific object classes optional Ldap Group NamesPage Configure PKI Authentication Configuring Common Access Card accessStart the authentication token application Page Modifying or deleting an existing security template For Access Control, select Solution‑specific access control Controlling access to device functionsConfiguring PKI Held Jobs Controlling access to device functions using the EWS Administrative MenusFunction Access ManagementDevice Solutions Troubleshooting Login issuesUnsupported USB Device error message Login screen does not appear when a Smart Card is insertedMake Sure the Kerberos File has Been Uploaded Users are unable to authenticateVerify the Date and Time on the Printer KDC did not respond within the required time error message Make Sure the IP Address or Host Name of the KDC is CorrectMake Sure the KDC is Available Make Sure Port 88 is not Blocked by a FirewallClient Name unknown error message Login does not respond at Getting User InfoIncrease the Panel Login Timeout Interval User is logged out almost immediately after loggingLdap lookups fail almost immediately Ldap issuesLdap lookups take a long time and then fail Held Jobs/Print Release Lite issues Unable to determine Windows User ID error messageThere are no jobs available for User error message Make Sure PKI Authentication is Setting the Correct User IDMake Sure ALL Jobs are Required to be Held Make Sure PKI Held Jobs is Installed and RunningJobs are printing out immediately Understanding the home screen Appendix a Using the touch screenUsing the on‑screen keyboard Shift Appendix B Acronyms Acronyms used in this guideAppendix C Description of access controls Access controlsBe ignored flushed when this function is protected Device Solutions Appendix D Using Common Access Cards Using a Common Access Card to access the printerLexmark Software License Agreement Page Page Index Page 3065326

X792DTE, 47B1000, X792DE, 47B1001 specifications

Lexmark is renowned for producing high-quality printers and multifunction devices that cater to a variety of business needs. Among its notable products are the Lexmark 47B1001 toner cartridge, the X792DE, and the X792DTE multifunction printers. These devices are designed to enhance productivity and efficiency in work environments, offering an array of features that stand out in the competitive landscape.

The Lexmark 47B1001 toner cartridge is specifically designed for use with the Lexmark X792DE and X792DTE printers. This cartridge is known for its impressive yield, providing high-quality prints while reducing overall printing costs. It employs advanced toner technology that ensures sharp text and vibrant images, making it ideal for both color documents and professional-grade presentations.

The X792DE is a versatile multifunction printer that combines print, copy, scan, and fax functions all in one robust device. It boasts a print speed of up to 55 pages per minute, allowing users to manage high-volume printing tasks efficiently. One of its standout features is a user-friendly touchscreen interface, which simplifies navigation and access to various functions. The printer supports a wide range of media sizes and types, from standard letter-size paper to larger formats, enabling versatile printing options for various business needs.

The X792DTE variant further enhances the capabilities of the X792DE by incorporating additional features such as advanced finishing options. This model can perform duplex printing and offers stapling, hole punching, and booklet creation, making it a perfect fit for businesses that require high-quality output with professional finishing touches. Additionally, both models support mobile printing through various platforms, ensuring that users can print documents directly from their smartphones and tablets seamlessly.

Both the X792DE and X792DTE utilize Lexmark’s award-winning color matching technology, which ensures consistency and accuracy in color reproduction across different print jobs. These printers are engineered for durability and reliability, featuring robust components that can withstand the rigors of daily use in a busy office environment.

In summary, the Lexmark 47B1001 toner cartridge, X792DE, and X792DTE multifunction printers represent a powerful combination of efficiency, quality, and versatility. With their impressive features and advanced technologies, they are well-equipped to meet the demands of modern businesses, helping to streamline workflows and enhance productivity in any office setting.
Top Page Image Contents