Step 3: Load print material
Width guide tab
Length guide
Length guide | Width guide |
lever |
Complete these instructions to load print material into any of the standard or optional trays. All paper trays are loaded in the same way.
1
2 Pull the width guide tab and slide the width guide to the far right side of the tray.
3 Squeeze the length guide lever and slide the length guide to the correct position for the size paper you are loading.
Paper size indicators
.
Width guide tab
Width guide
4 Place the paper into the paper tray with the recommended print side face down for
5Pull the width guide tab and slide the width guide to the left until it lightly rests against the edge of the paper stack.
Paper capacity mark
6 Reinstall the tray.
17