Lexmark 522 setup guide Windows Supported connections

Page 30

lation. This documentation is also available on the Lexmark Web site at www.lexmark.com/publications.

Local printing The following instructions explain how to install a printer driver on a printer attached to a computer using a parallel or USB connection.

Windows Supported connections

The following printer connections are supported:

Parallel (Windows 95/98/Me, Windows NT 4.0, and Windows 2000)

USB (Windows 98/Me and Windows 2000)

Note: Using the Lexmark T522 custom printer driver pro- vides enhanced functionality, such as printer status alerts.

Printer drivers

The following printer drivers are supported:

Windows system printer driver

Lexmark T522 custom printer driver

System drivers are built into Windows operating systems.

Custom drivers are available on the drivers CD.

Updated system and custom drivers are available at

www.lexmark.com/drivers.

Installation instructions

Read the detailed online instructions on the drivers CD. Click View documentation and look for information about local printer installation. Detailed instructions are provided for parallel and USB connections.

Macintosh If you are setting up the printer for local printing, you need to install the Lexmark T522 PPD and use it with the Laser- Writer 8 printer driver or the Adobe PostScript driver.

The Lexmark T522 PPD and specific information about local printer installation on Macintosh computers can be found on the drivers CD that shipped with your printer.

After the printer is installed, print a test page to verify your printer is correctly set up.

28

Image 30
Contents Lexmark T522 Conventions Edition MayGetting started See Install paper options and printer Installing the 2000-sheet drawerInstalling a 250-sheet or 500-sheet drawer Installing a duplex unit Handhold Square hole Tab Round peg Page Operator panel overlay Lift open the envelope feeder connector door Install memory and option cards Accessing the printer system boardHold the shield by the tabs and lift it off Installing printer memory or flash memory Installing an optional firmware card Installing an option card Page Reattaching the shield and closing the doors Load print material Attach cables Page Page Verify printer setup Turning on the printer Printing a network setupReady Configure for TCP/IP Setting the printer IP addressVerifying IP settings Configure for Pull Printing ImageQuick Install printer drivers Windows PortsPrinting methods Novell Distributed Print Services Ndps Windows Supported connections Page 09H0401 H0000