Lexmark 522 setup guide

Page 31

UNIX/Linux Your printer supports many UNIX platforms, such as Sun Solaris and Linux.

Note: The Sun Solaris package is located both on the drivers CD and on the Lexmark Web site at www.lexmark.com/drivers.

Lexmark provides a printer driver package for each sup- ported UNIX platform containing all the necessary drivers and PPDs. The user’s guide contained in each package gives detailed instructions for installing and using Lexmark printers in UNIX environments.

All the driver packages support local printing using a paral- lel connection. The driver package for Sun Solaris sys- tems also supports USB connections to Sun Ray appliances and Sun workstations.

You can download these printer driver packages from Lex- mark’s Web site at www.lexmark.com/drivers. Depending on which drivers CD shipped with your printer, you may also find the driver package you need on the CD.

29

Image 31
Contents Lexmark T522 Edition May ConventionsGetting started See Installing the 2000-sheet drawer Install paper options and printerInstalling a 250-sheet or 500-sheet drawer Installing a duplex unit Handhold Square hole Tab Round peg Page Operator panel overlay Lift open the envelope feeder connector door Accessing the printer system board Install memory and option cardsHold the shield by the tabs and lift it off Installing printer memory or flash memory Installing an optional firmware card Installing an option card Page Reattaching the shield and closing the doors Load print material Attach cables Page Page Turning on the printer Printing a network setup Verify printer setupReady Setting the printer IP address Configure for TCP/IPVerifying IP settings Configure for Pull Printing ImageQuick Windows Ports Install printer driversPrinting methods Novell Distributed Print Services Ndps Windows Supported connections Page 09H0401 H0000