Operator panel overlay
4 Attach the operator panel overlay.
If English is not your preferred language, attach the overlay with the appropriately translated names for the operator panel.
aPeel the protective backing off the overlay.
bAlign the holes in the overlay with the buttons on the operator panel and press it into place.
cRub the overlay firmly to make sure it adheres securely to the operator panel.
dPeel the protective covering away from the over- lay.
5 Attach the paper bail.
aRemove the printer top cover and slide the plas- tic bracket onto the static brush holder. Adjust the bracket so it is centered over the area where paper exits.
bPlace the tips of the wire paper bail into the ends of the plastic bracket so that the bail curves downward.
cReplace the top cover.
8