Lexmark 522 setup guide Install paper options and printer, Installing the 2000-sheet drawer

Page 5

Step 1: Install paper options and printer

The table illustrates various combinations of paper options supported by your printer.

Lexmark T522(n)

Attach up to:

Four optional drawers.

2000-Sheet drawer

250-Sheet drawer

500-Sheet drawer

500-Sheet Duplex unit

Envelope feeder

 

 

 

 

Installing the 2000-sheet drawer

Lexmark T522 label (colored triangle)

Your printer supports one 2000-sheet drawer. It gives your printer added capacity by letting you load up to four reams (approximately 2,000 sheets) of 20 lb. paper.

The 2000-sheet drawer is packaged with a User’s Guide that contains detailed instructions for instal- lation, setup, and use, including loading paper and removing paper jams.

When you have finished installing the 2000-sheet drawer, install any other drawers or an optional duplex unit that you may have purchased.

3

Image 5
Contents Lexmark T522 Edition May ConventionsGetting started See Installing the 2000-sheet drawer Install paper options and printerInstalling a 250-sheet or 500-sheet drawer Installing a duplex unit Handhold Square hole Tab Round peg Page Operator panel overlay Lift open the envelope feeder connector door Accessing the printer system board Install memory and option cardsHold the shield by the tabs and lift it off Installing printer memory or flash memory Installing an optional firmware card Installing an option card Page Reattaching the shield and closing the doors Load print material Attach cables Page Page Turning on the printer Printing a network setup Verify printer setupReady Setting the printer IP address Configure for TCP/IPVerifying IP settings Configure for Pull Printing ImageQuick Windows Ports Install printer driversPrinting methods Novell Distributed Print Services Ndps Windows Supported connections Page 09H0401 H0000