Lexmark Z2400 Series manual Load up to

Load up to

25 greeting cards

25 index cards

25 photo cards

25postcards

10envelopes

25 sheets of labels

25 transparencies

Make sure

•The total thickness of the card stack does not exceed 10 mm (0.4 inches).

•The print side of the cards faces you.

•The cards are loaded against the right side of the paper support.

•The paper guide rests against the left edge of the cards.

•The stamp location is in the upper left corner.

•The print side of the envelopes faces you.

•The envelopes are designed for use with inkjet printers.

•The envelopes are loaded against the right side of the paper support.

•The paper guide rests against the left edge of the envelopes.

Warning—Potential Damage: Do not use envelopes that have metal clasps, string ties, or metal folding bars.

Notes:

–Do not load envelopes with holes, perforations, cutouts, or deep embossing.

–Do not use envelopes that have exposed flap adhesive.

•You follow the loading instructions that came with the labels.

•The print side of the labels faces you.

•The adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.

•You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.

•The label sheets are loaded against the right side of the paper support.

•The paper guide rests against the left edge of the label sheets.

•The rough side of the transparencies faces you.

•You don't use transparencies with paper backing sheets.

•The transparencies are loaded against the right side of the paper support.

•The paper guide rests against the left edge of the transparencies.

Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging.

33