Emerson NX manual Manage UPS Adapter, Connectivity combinations

Options

3.3Manage UPS Adapter

ManageUPS NET Adapter III offers an open approach to network power management by delivering a complete set of manageability options including: WEB, Telne and Out-Of-Band accessibility, in addition to the full-featured, embedded SNMP agent. Event messages are also available as e-mail and SNMP Traps - a truly versatile tool for managing Liebert NX UPS systems in a network environment.

The software features:

•DHCP Network Configuration—Supports automatic IP settings configuration using the DHCP protocol. The DHCP server must be located on a network that is accessible from the LAN that ManageUPS-II is connected to.

•Multiple Network Access Methods—Site power and UPS status information can be accessed securely from any computer on your network. View UPS system status in real time for situational decision support. Access via Telnet, SNMP, or Web Browser. SNMP Agent conforms to RFC1628 Standard UPS MIB.

•Network Shutdown—ManageUPS includes a UPS status server and a network shutdown controller. Use these features with host shutdown software (RCCMD, MopUPS NSA, MopUPS Professional or MopUPS P/R) to ensure safe shutdown of multiple servers, workstations or PCs in TCP/IP network environments.

•Event and Data Logging—ManageUPS II keeps a log file of UPS events and environment data. On-board log file viewer lets you filter records for easy analysis.

For details, see http://connectivity.Emersonpower.com/

3.4Connectivity

Table 3 gives details of the various combinations of connectivity solutions that can be used with the Liebert NX. Only one of the combinations may be used at a time. Other combinations may be possible. For further information, see http://connectivity.Emersonpower.com/ The following interfaces can be found on the Liebert NX:

Table 3	Connectivity combinations
Interface	Description	Input/Output/Serial/CAN
XS3	Slot available for use with a connectivity option, typically ManageUPS	Serial
	NET III Adapter
XS6	Slot for the LIFE.net slot modem	Serial
X3	Standard serial interface RS232 COM - female –	Serial
	Available, if XS3 slot is empty or MUN III card is installed
	Standard serial interface RS-232 COM for external LIFE.net kit (e.g.
X6	LIFE.net, GSM modem) only is XS6 is empty - male - Not available, if a	Serial
	XS6 slot modem is installed
X19	2x15-pole screw connector for parallel UPS connection
X20	RJ45 interface for synchronization with external signal
TB1	16-pole screw connector for input contacts (see 3.4.1 - Available	Input
	Selectable Input Contacts)
TB2	16-pole screw connector for output contacts (see 3.4.2 - Available	Output
	Selectable Output Contacts)
XT 3/8	4-pole screw for EPO input and output	Input and Output
XT1	External battery temperature sensor connection	Input
TB3	Battery Interface and SKRU Key Status	Input and Output
TB4	SKRU Enable Status	Input and Output

Liebert®NX™ 28