Oki 740 manual Memory Key, Clear Key, Quick Key, Hook Voice Request Key, POWER/ALARM Light

MEMORY Key REDIAL/PAUSE Key

This key selects memory transmit operation. Documents may be scanned into memory for immediate or later transmission.

CLEAR Key

This key is used to delete entries for various machine settings or stored numbers. It is also used during editing numbers and settings to advance the editing position one character at a time when changing settings or stored fax numbers.

QUICK Key

This key is used to initiate quick dialling of stored fax numbers. Pressing [QUICK] followed by a two-digit number or a one-touch quick dial key selects one of up to 60 stored fax numbers.

This key redials the most recently dialled fax number. It is also used to enter a brief pause in a stored fax number, such as the pause sometimes required after the access digit for an outside line via an internal telephone exchange.

HOOK VOICE REQUEST Key

This key is used to place the machine in an on-line state for manual dialling, so that you may monitor the audible progress of a call. It is also used to signal to the remote party that you require voice communication after the currently transmitting or receiving fax message.

POWER/ALARM Light

This light illuminates when power is applied and the machine is switched on. In the event of a malfunction, or if recording paper runs out, this lamp will flash on and off.

19