Installing Additional Memory
This kit contains an additional 1MByte extra memory in the form of two memory chips, which may be fitted to your OKIFAX 740 in a matter of minutes.
Note: These memory chips are extremely sensitive to static electricity. Care must be exercised in handling them. Also take care not to bend or damage the pins on these devices. If in any doubt, consult your dealer.
4.Pull out the paper catch tray to reveal the small silver coloured panel (1) on the bottom of the machine.
To install the option memory, proceed as follows:
1.Switch off the ac power switch on your fax machine.
2.Remove any documents from the document feeder, and remove all paper from the automatic paper feeder.
3.Turn the machine onto its left side.
➊
5.Insert a small screwdriver into the slot on the cover and gently push the cover upwards, and then towards you and away from the machine.
6.Grasp the cover with your fingers and pull it down and clear of the machine.
64