Fujitsu FD-1008AT, FD-1016AT user manual

Page 17

5.In the case of a cascaded connection (when KVM Switch is connected in a two-level connection)

By using cascaded connections (maximum 1 master and 8 slaves) it is possible to hook up a maximum of 64 servers.

1)Connect the master switch device's ports one through eight to the second level of switch devices (called slaves), in the same way as for the [first level].

2)Next, use the special cables to attach the [keyboard/mouse] and [DISP] connector of the first level switching device (called master) to the [Keyboard], [Mouse], and [Console] connector on the console ports of the second level slave switch devices.

3)To increase the number of slaves, connect them in the same way as described in steps 1 and 2 above. Do not connect slaves beyond the second level. Third level connection does not work.

When the Console Drawer is used in a cascaded connection, the connector for the slave Console and for the master-side server can be connected using only the PS/2 special cable. Operation by a cable other than the special cable for the PS/2 cable will not be possible.

14

Image 17
Contents Servis Fujitsu Component AMERICA, INC Page Contents Packing List PrefaceConventions Page Important Notices Safety PrecautionsSafety Instructions Moving Console Drawer DisposalInstalling the Guide Rails when using a tapped guide rail InstallationInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Connectors for servers 1 through Power cable connectorDIP Switches Connector for SunOFF Connecting Cables Getting started Connecting and Removing CablesConnect the power cable Connect the serversPage Removing Cables Operating the Console Drawer OperationOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Hot-Key SW operations Keyboard Operation, LED Indicators and the Reset SWPointing Device Operation Selecting the Hot Key Mode Switching the ServerSelecting the Server when the Power is on OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Auto Scan Mode Switching in Hot Key Mode BScreen Details Setting/Changing Server NamesConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Clean the keyboard and pointing device with a sterile cloth Cleaning Console DrawerSpecification Technical SpecificationsProduct ID Remark Optional Accessories Sold separatelySymptom Cause Action TroubleshootingSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper