Fujitsu FD-1016AT, FD-1008AT user manual Switching in Hot Key Mode B, Auto Scan Mode

Page 32

Switching in Hot Key Mode B

The OSD menu is displayed at the top left of the screen when the <Ctrl> key is pressed

twice and Hot Key Mode B is entered.

(Press the <Ctrl> key quickly in succession.)

When the text background is displayed in red, the screen is switched by pressing the key

of the desired server number.

a. [Direct Switching Via Keyboard]

8-port KVM Switch

1)Use the number keys <1> to <8>. For a cascaded connection, first use the number keys <1> to <8> to select a master-side port, then use the function keys <F1> to <F8> to select a slave-side port.

16-port KVM Switch

1)To select master port #1: press <1> on the keyboard (& wait 1 sec) or <1>+<Enter>

2)To select master port #14: press <1><4> on the keyboard (press <4> within one second of pressing <1>)

3)To select master port #2: press <2> on the keyboard

4)With a cascaded connection, select the cascade-connected port on the master side.

To select slave port #1: press <F1>, or press <F>+<1> (& wait 1 sec) or <Enter>

To select slave port #14: press <F>+<1>+<4> (press <4> within one second of pressing <1>)

To select slave port #2: press <F2> or <F>+<2>

Screens can be switched directly by these key operations.

Switching the screen exits you from the Hot Key Mode.

No normal keyboard or mouse input is accepted while the text background is red.

To change the text background back to blue (exit Hot Key Mode), either press a number

key, or press the <Esc> key, or the <Enter> key.

If the <0> key is pressed while the text background is red, Auto Scan Mode is entered.

Auto Scan Mode may be cancelled as follows:

<Enter> key:

Console switches to the currently displayed screen.

<Esc> key:

Console reverts to the server active before Auto Scan Mode was

entered.

 

[Auto Scan Mode]

1)The screen is automatically switched at fixed cycles by pressing the <0> key on the keyboard in the Hot Key Mode.

2)The switching speed (Auto Scan Interval) may be adjusted by pressing the <↑> cursor key to make it faster (shorter) & the <↓> cursor key to make it slower (longer). Allowed Auto Scan Intervals are: 3, 5, 10 (default), 20, 40 and 60 seconds. The new Auto Scan Interval is shown on the OSD for 3 seconds.

3) Servers that are powered OFF are skipped.

No normal keyboard or mouse input is accepted while the Auto Scan Mode is running.

4)To return to Hot Key Mode, the Auto Scan Mode must first be cancelled.

5)Auto Scan Mode may be cancelled as follows:

29

Image 32
Contents Servis Fujitsu Component AMERICA, INC Page Contents Packing List PrefaceConventions Page Safety Precautions Important NoticesSafety Instructions Disposal Moving Console DrawerInstallation Installing the Guide Rails when using a tapped guide railInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Power cable connector Connectors for servers 1 throughDIP Switches Connector for SunOFF Connecting and Removing Cables Connecting Cables Getting startedConnect the power cable Connect the serversPage Removing Cables Operation Operating the Console DrawerOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Keyboard Operation, LED Indicators and the Reset SW Hot-Key SW operationsPointing Device Operation Selecting the Hot Key Mode Switching the ServerSelecting the Server when the Power is on OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Switching in Hot Key Mode B Auto Scan ModeSetting/Changing Server Names Screen DetailsConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Cleaning Console Drawer Clean the keyboard and pointing device with a sterile clothTechnical Specifications SpecificationOptional Accessories Sold separately Product ID RemarkTroubleshooting Symptom Cause ActionSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper