Fujitsu FD-1008AT, FD-1016AT user manual Symptom Cause Action

Page 41

 

 

 

 

Symptom

Cause

Action

Cascaded

A problem has occurred at the

Press the reset switch.

connections are not

switcher.

(Both the slave and the master)

recognized.

 

 

 

The OSD display

No image (H/V Sync) signal from

Input image (H/V Sync) signal.

flashes at 5-second

server (suspended state)

Or, switch to server having an

cycles.

 

image (H/V Sync) signal.

38

Image 41
Contents Servis Fujitsu Component AMERICA, INC Page Contents Packing List PrefaceConventions Page Important Notices Safety PrecautionsSafety Instructions Moving Console Drawer DisposalInstalling the Guide Rails when using a tapped guide rail InstallationInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Connectors for servers 1 through Power cable connectorDIP Switches Connector for SunOFF Connecting Cables Getting started Connecting and Removing CablesConnect the power cable Connect the serversPage Removing Cables Operating the Console Drawer OperationOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Hot-Key SW operations Keyboard Operation, LED Indicators and the Reset SWPointing Device Operation Selecting the Hot Key Mode Switching the ServerSelecting the Server when the Power is on OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Auto Scan Mode Switching in Hot Key Mode BScreen Details Setting/Changing Server NamesConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Clean the keyboard and pointing device with a sterile cloth Cleaning Console DrawerSpecification Technical SpecificationsProduct ID Remark Optional Accessories Sold separatelySymptom Cause Action TroubleshootingSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper