Fujitsu FD-1016AT, FD-1008AT user manual

Page 30

How to switch the server on the OSD screen

Switching in Hot Key Mode A

The following OSD screen is displayed if you enter Hot Key Mode A after pressing the Hot-Key SW, <Ctrl>+<Alt>+<Shift> keys at the same time, and pressing the <Scroll Lock> key twice.

Example of Hot Key Mode A indication in a cascaded connection

a. [Switching Via Keyboard]

1)Use the <↑><↓> cursor keys to select the channel of the server No. on the left side of the OSD screen.

2)If a cascade-connected channel is selected, the state of the selected slave device is shown on the right side of the OSD.

3)If a cascade-connected channel is selected, pressing the <→> cursor key causes control to switch to the right (slave) side of the OSD, with the currently selected cascaded host shown in purple. Press the <←> cursor key to return control to the left (master) side of the OSD.

4)On the right side of the OSD, use the <↑> & <↓> cursor keys as before to select a

cascaded host (channel).

5)Press the <Enter> key to actually effect the console switch to the selected server. The name of the server switched to is shown at the top-left of the screen for about 3 seconds after the switch is effected.

If ports 1 to 8 are selected when using a 16-port KVM Switch, ports 9 to 16 are displayed by the <Page Down> key. Ports 1 to 8 are switched to by the <Page Up> key.

27

Image 30
Contents Servis Fujitsu Component AMERICA, INC Page Contents Preface ConventionsPacking List Page Safety Precautions Important NoticesSafety Instructions Disposal Moving Console DrawerInstallation Installing the Guide Rails when using a tapped guide railInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts DIP Switches Power cable connectorConnectors for servers 1 through Connector for SunOFF Connect the power cable Connecting and Removing CablesConnecting Cables Getting started Connect the serversPage Removing Cables Operation Operating the Console DrawerOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Keyboard Operation, LED Indicators and the Reset SW Hot-Key SW operationsPointing Device Operation Switching the Server Selecting the Server when the Power is onSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Switching in Hot Key Mode B Auto Scan ModeSetting/Changing Server Names Screen DetailsConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Cleaning Console Drawer Clean the keyboard and pointing device with a sterile clothTechnical Specifications SpecificationOptional Accessories Sold separately Product ID RemarkTroubleshooting Symptom Cause ActionSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper