Fujitsu FD-1008AT, FD-1016AT user manual

Page 31

b. [Direct Switching Via Keyboard]

8-port KVM Switch

1)Use the number keys <1>~<8>. For a cascaded setup, first use the number keys <1>~<8> to select a master-side channel, then use the function keys <F1>~<F8> to select a slave-side port.

16-port KVM Switch

1)To select master port #1: press <1> (& wait 1 sec), or press <1> then <Enter>

2)To select master port #14: press <1><4> on the keyboard (press <4> within one second of pressing <1>)

3)To select master port #2: press <2> on the keyboard

4)With a cascaded connection, select the port where the first cascaded connection on the

master side was made.

To select slave port #1: press <F1>, or press <F>+<1> (& wait 1 sec) or <Enter>

To select slave port #14: press <F>+<1>+<4> (press <4> within one second after pressing <1>)

To select slave port #2: press <F2> or <F>+<2>

Screens can be switched directly by these key operations.

After the screen is switched, the name of the server that you switched to is displayed at the top left of the screen, the OSD screen display disappears after about three seconds,

and the Hot Key Mode is exited.

When selecting a port in a cascaded connection, first select the cascaded

connection port on the master side. Then, select and switch to the port on

the slave side.

28

Image 31
Contents Servis Fujitsu Component AMERICA, INC Page Contents Conventions PrefacePacking List Page Important Notices Safety PrecautionsSafety Instructions Moving Console Drawer DisposalInstalling the Guide Rails when using a tapped guide rail InstallationInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Connector for Sun Power cable connectorConnectors for servers 1 through DIP SwitchesOFF Connect the servers Connecting and Removing CablesConnecting Cables Getting started Connect the power cablePage Removing Cables Operating the Console Drawer OperationOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Hot-Key SW operations Keyboard Operation, LED Indicators and the Reset SWPointing Device Operation Selecting the Server when the Power is on Switching the ServerSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Auto Scan Mode Switching in Hot Key Mode BScreen Details Setting/Changing Server NamesConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Clean the keyboard and pointing device with a sterile cloth Cleaning Console DrawerSpecification Technical SpecificationsProduct ID Remark Optional Accessories Sold separatelySymptom Cause Action TroubleshootingSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper