Fujitsu FD-1016AT, FD-1008AT user manual OSD in a non-cascaded connection Hot Key Mode a

Page 28

1) OSD in a non-cascaded connection (Hot Key Mode A)

(Different from actual server name display)

2) OSD screen in a cascaded connection (Hot Key Mode A)

Example OSD Screen with cascaded channel selected

[Screen Details]

1.Numbers 1 to 8 and function keys F1 to F8 (for a cascaded connection) indicate the server connected ports. Any numbers 1 to 8 displayed in green indicates that the currently connected server is turned ON.

2.The mark shows the currently selected server.

3.Purple text shows the hosts currently selectable with the cursor keys.

4.SV1-XXXXXXXXXX shows the name of the server currently connected to port 1.

5.The bottom of the screen shows simple explanations of allowed key operations.

6.Cascaded connections are displayed on the slave server in blue. (In the above example, channel 5 is in a cascaded connection.)

7.Depending on whether the selected channel has a cascaded slave device attached to

it or not, the OSD master device display section (1. above) changes as follows:

-Non-cascaded channel: 14-character wide master device section / nothing in slave section. (The OSD screen is the same without cascade connection.)

-Cascaded channel: 3-character wide master device section / 14-character wide slave section.

25

Image 28
Contents Servis Fujitsu Component AMERICA, INC Page Contents Conventions PrefacePacking List Page Safety Precautions Important NoticesSafety Instructions Disposal Moving Console DrawerInstallation Installing the Guide Rails when using a tapped guide railInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Power cable connector Connectors for servers 1 throughDIP Switches Connector for SunOFF Connecting and Removing Cables Connecting Cables Getting startedConnect the power cable Connect the serversPage Removing Cables Operation Operating the Console DrawerOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Keyboard Operation, LED Indicators and the Reset SW Hot-Key SW operationsPointing Device Operation Selecting the Server when the Power is on Switching the ServerSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Switching in Hot Key Mode B Auto Scan ModeSetting/Changing Server Names Screen DetailsConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Cleaning Console Drawer Clean the keyboard and pointing device with a sterile clothTechnical Specifications SpecificationOptional Accessories Sold separately Product ID RemarkTroubleshooting Symptom Cause ActionSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper