Fujitsu FD-1008AT, FD-1016AT user manual Operation, Operating the Console Drawer

Page 19

Operation

CAUTION

Pull the Console Drawer toward slowly until the slide rails lock.

If they do not lock, the weight of the Console Drawer may cause it to move. Be careful not to pinch your hand when doing such activities as pulling or pushing the slide module and opening and closing the LCD.

Operating the Console Drawer

1.If the rubber stabilizer has not been removed yet, remove it now.

2.Push down on the latch lever on the front left side of the Console Drawer. Pull out the Console Drawer until it clicks.

Before pulling it out, make sure that the two screws on the front of the Console Drawer are tightly fixed to the rack.

Pulling out the slide module diagram

3.Push up on the LCD lock on the left side of the handle, and then grasp the handle and open the top of the monitor.

4.Turn on the power by pushing the POWER button.

5.Turn on the power of each of the connected servers.

16

Image 19
Contents Servis Fujitsu Component AMERICA, INC Page Contents Conventions PrefacePacking List Page Important Notices Safety PrecautionsSafety Instructions Moving Console Drawer DisposalInstalling the Guide Rails when using a tapped guide rail InstallationInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Connector for Sun Power cable connectorConnectors for servers 1 through DIP SwitchesOFF Connect the servers Connecting and Removing CablesConnecting Cables Getting started Connect the power cablePage Removing Cables Operating the Console Drawer OperationOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Hot-Key SW operations Keyboard Operation, LED Indicators and the Reset SWPointing Device Operation Selecting the Server when the Power is on Switching the ServerSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Auto Scan Mode Switching in Hot Key Mode BScreen Details Setting/Changing Server NamesConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Clean the keyboard and pointing device with a sterile cloth Cleaning Console DrawerSpecification Technical SpecificationsProduct ID Remark Optional Accessories Sold separatelySymptom Cause Action TroubleshootingSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper