Fujitsu FD-1016AT, FD-1008AT user manual

Page 6

CAUTION

Please note the safety information in [Important Notices].

1.Check the package delivered and whether the Console Drawer has been damaged when unpacking.

2.Remove the rubber stabilizer from the front left side of the Console Drawer.

The rubber stabilizer is inserted to prevent the Console Drawer from sliding when installing or moving it. Be sure to keep it after finishing the installation for when it needs to be used again.

3

Image 6
Contents Servis Fujitsu Component AMERICA, INC Page Contents Preface ConventionsPacking List Page Safety Precautions Important NoticesSafety Instructions Disposal Moving Console DrawerInstallation Installing the Guide Rails when using a tapped guide railInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts DIP Switches Power cable connectorConnectors for servers 1 through Connector for SunOFF Connect the power cable Connecting and Removing CablesConnecting Cables Getting started Connect the serversPage Removing Cables Operation Operating the Console DrawerOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Keyboard Operation, LED Indicators and the Reset SW Hot-Key SW operationsPointing Device Operation Switching the Server Selecting the Server when the Power is onSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Switching in Hot Key Mode B Auto Scan ModeSetting/Changing Server Names Screen DetailsConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Cleaning Console Drawer Clean the keyboard and pointing device with a sterile clothTechnical Specifications SpecificationOptional Accessories Sold separately Product ID RemarkTroubleshooting Symptom Cause ActionSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper