Fujitsu FD-1008AT, FD-1016AT user manual Adjusting the Monitor

Page 21

Adjusting the Monitor

The five buttons and two LEDs on the monitor are explained in order from left to right.

Power button: Push this button to turn on the power to the monitor. Also, pushing this button while the monitor is on cuts the power to the monitor.

Power lamp (green): This lamp lights when the power to the monitor is on and goes out when the power to the monitor is off.

Indicator lamp (orange): This lamp lights when the monitor is in energy-saving mode.

Menu button: Push this button to adjust the monitor.

▼Button: Push this button to select OSD menu items (downward) or to decrement values.

▲Button: Push this button to select OSD menu items (upward) or to increment values.

Button: Push this button to select or enter things.

You can eliminate screen noise by adjusting the Phase and the

Clock

CAUTION

Be careful when applying a strong force to the equipment when the Console Drawer is pulled out and the monitor is opened and being used, as there is a risk that the rack may fall over. Do not strongly press on the monitor's screen, scratch it with sharp objects or place magnetic objects near it. Doing so may damage the monitor.

18

Image 21
Contents Servis Fujitsu Component AMERICA, INC Page Contents Preface ConventionsPacking List Page Important Notices Safety PrecautionsSafety Instructions Moving Console Drawer DisposalInstalling the Guide Rails when using a tapped guide rail InstallationInstalling tapped guide rails diagram Installing Console Drawer Names and Functions of Parts Connectors for servers 1 through Power cable connectorDIP Switches Connector for SunOFF Connecting Cables Getting started Connecting and Removing CablesConnect the power cable Connect the serversPage Removing Cables Operating the Console Drawer OperationOpen the monitor completely Opening the LCD diagram Adjusting the Monitor Basic Adjustment Procedure DOS Mode Resolution and Refresh Rate Hot-Key SW operations Keyboard Operation, LED Indicators and the Reset SWPointing Device Operation Switching the Server Selecting the Server when the Power is onSelecting the Hot Key Mode OSD in a non-cascaded connection Hot Key Mode a Hot Key Mode B Page Page Auto Scan Mode Switching in Hot Key Mode BScreen Details Setting/Changing Server NamesConstant Server Name Display Function Edid Setting Mode Storing Console Drawer Clean the keyboard and pointing device with a sterile cloth Cleaning Console DrawerSpecification Technical SpecificationsProduct ID Remark Optional Accessories Sold separatelySymptom Cause Action TroubleshootingSymptom Cause Action Page Reprinting of this manual without permission is prohibited This manual is made of recycled paper