Xerox Inkjet Printer manual Print the Alignment Test Pattern

Page 50

If a pattern other than zero has the straightest lines, then select that pattern on the dialog box. Select Print the Alignment Test Pattern if you want to verify the adjustment, then click Align. If you are not verifying the adjustment, click Done.

If none of the patterns has straight lines, then select the pattern that is the closest (this should be -4 or +4). Make sure Print the Alignment Test Pattern is selected and then click Align. Wait for the alignment test page to print and look for the straightest lines again.

Print the Alignment Test Pattern

	When selected, the alignment test page
	will be printed after Align is clicked. It
	is recommended that you do this in
	order to verify the adjustment. For best
	printing you want pattern zero to have
	the straightest lines.
Test	Prints a diagnostic sample page
	(resident in the printing ROM) that you
	can use to determine printer problems.

42

Image 50

Contents DocuPrint C8 Ink Jet Printer Publication number 701P30101 Customer Support Page Contents Troubleshooting the printer Selecting and ordering suppliesPrinting DOS in a Window Index Page Introduction Safety notes Generating Floppy Disks from your CDPage Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the printer’s features Hardware features Inside view of DocuPrint C8 Printer Back view of DocuPrint C8 Printer Control panel Operation Normal Printer OperationLED On Continuously LED Blinking Intermittently 0.2 sec On, 1.4 sec OffPrinter specifications Feature SpecificationFeatureSpecification System Requirements Printable area / Margins Recommended PossibleUsing the printer settings Downloading the Windows NT 4.0 Printer DriverLanguage field, select US English or French From the Printers folder for Windows 95/98 Accessing printer settingsFrom a Windows software application From the Printers folder for Windows NTPaper/Output Property Page Print quality Paper sizePaper type Save As button Photo quality Resolution isSaved settings Status button Default AllDelete button Device mimic printer illustration in lower left cornerLayout Property Print crop marks Default buttonNumber of sheets Print sheetsClear All Cancel Help Select SheetsPrint borders Defaults buttonImages per sheet NoneMirror Image Image Quality Property Contrast SaturationGreen DefaultsRed BlueAbout Status Property Page Percent complete Now printingCopy RestartMaintenance Property Page ∙ Previously used print cartridge ∙ Color ink cartridgeAlign Clean∙ New print cartridge Print the Alignment Test Pattern TestChecking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Document sent to the printer does not print Installation/Reference Guide for Front Panel LED is on continuouslyPage Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing Ink is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Selecting and ordering supplies Selecting plain paper Paper weightsCartridges and print heads Description Reorder NumberSelecting specialty print media Selecting banner paper Selecting labelsSelecting transparencies Selecting envelopesPrinting DOS in a Window Windows NT Index