Xerox Inkjet Printer manual Front Panel LED is on continuously, Installation/Reference Guide for

Page 58

The Front Panel LED is on continuously

Cause

Suggested Solution

The printer is out of paper.

Add paper to the paper tray. Then, press and release the Printer Control (green) button.

The print head is not installed correctly.

Press and release the Printer Control (green) button to center the print carriage. Remove, then reinstall the print head. Press and release the Printer Control button to return to the home position.

A carriage position error

Open the printer cover and clear

occurred.

any obstructions in the print head

 

path, such as packaging material.

 

Press and release the Printer

 

Control (green) button to clear

 

the error and eject the paper.

A paper feed error occurred.

Clear the paper jam. Refer to the

 

online help or Quick

 

Installation/Reference Guide for

 

more information.

An internal printer error

Press and hold the Printer

occurred.

Control (green) button for at

 

least two seconds. If the problem

 

persists, unplug the power cord

 

from the printer, wait at least ten

 

seconds, and then reconnect it.

 

If the problem continues, contact

 

the Xerox Customer Support

 

Center.

50

Image 58
Contents DocuPrint C8 Ink Jet Printer Publication number 701P30101 Customer Support Page Contents Troubleshooting the printer Selecting and ordering suppliesPrinting DOS in a Window Index Page Introduction Safety notes Generating Floppy Disks from your CDPage Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the printer’s features Hardware features Inside view of DocuPrint C8 Printer Back view of DocuPrint C8 Printer Control panel Operation Normal Printer OperationLED On Continuously LED Blinking Intermittently 0.2 sec On, 1.4 sec OffPrinter specifications Feature SpecificationFeatureSpecification System Requirements Printable area / Margins Recommended PossibleUsing the printer settings Downloading the Windows NT 4.0 Printer DriverLanguage field, select US English or French From the Printers folder for Windows 95/98 Accessing printer settingsFrom a Windows software application From the Printers folder for Windows NTPaper/Output Property Page Paper type Paper sizePrint quality Saved settings Photo quality Resolution isSave As button Status button Default AllDelete button Device mimic printer illustration in lower left cornerLayout Property Print crop marks Default buttonNumber of sheets Print sheetsClear All Cancel Help Select SheetsPrint borders Defaults buttonImages per sheet NoneMirror Image Image Quality Property Contrast SaturationGreen DefaultsRed BlueAbout Status Property Page Percent complete Now printingCopy RestartMaintenance Property Page ∙ Previously used print cartridge ∙ Color ink cartridge∙ New print cartridge CleanAlign Print the Alignment Test Pattern TestChecking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Document sent to the printer does not print Installation/Reference Guide for Front Panel LED is on continuouslyPage Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing Ink is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Selecting and ordering supplies Selecting plain paper Paper weightsCartridges and print heads Description Reorder NumberSelecting specialty print media Selecting banner paper Selecting labelsSelecting transparencies Selecting envelopesPrinting DOS in a Window Windows NT Index