Xerox Inkjet Printer manual Selecting labels, Selecting transparencies, Selecting banner paper

Page 76

Selecting labels

Use only paper face label stock. Ink will not dry on vinyl, plastic, or clear label stock. Individual labels will not feed properly. Letter or A4 sheet size for the labels is required at a minimum. For best results, use labels designed for an ink jet printer. The maximum quantity the tray can accommodate is 50 sheets.

Do not use any label material that is partially used, folded, curled, or wrinkled.

Selecting transparencies

Use transparencies designed for ink jet printers only. Do not use paper-backed transparencies. Place transparencies so that the rough side faces the back of the printer.

Selecting banner paper

Use any banner paper designed for ink jet printers. Do not use track-fed paper or paper in rolls. The C8 printer can accommodate single 8.5 x 55 in. or 210 mm. x 1485 mm. sheets.

Selecting envelopes

Most short flap envelopes work well in the printer, although some variables in paper composition may affect print quality. Fully test an envelope before purchasing large quantities.

68

Image 76

Contents DocuPrint C8 Ink Jet Printer Publication number 701P30101 Customer Support Page Contents Troubleshooting the printer Selecting and ordering suppliesPrinting DOS in a Window Index Page Introduction Safety notes Generating Floppy Disks from your CDPage Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the printer’s features Hardware features Inside view of DocuPrint C8 Printer Back view of DocuPrint C8 Printer Control panel Operation Normal Printer OperationLED On Continuously LED Blinking Intermittently 0.2 sec On, 1.4 sec OffPrinter specifications Feature SpecificationFeatureSpecification System Requirements Printable area / Margins Recommended PossibleUsing the printer settings Downloading the Windows NT 4.0 Printer DriverLanguage field, select US English or French Accessing printer settings From a Windows software applicationFrom the Printers folder for Windows 95/98 From the Printers folder for Windows NTPaper/Output Property Page Paper type Paper sizePrint quality Saved settings Photo quality Resolution isSave As button Default All Delete buttonStatus button Device mimic printer illustration in lower left cornerLayout Property Default button Number of sheetsPrint crop marks Print sheetsClear All Cancel Help Select SheetsDefaults button Images per sheetPrint borders NoneMirror Image Image Quality Property Contrast SaturationDefaults RedGreen BlueAbout Status Property Page Now printing CopyPercent complete RestartMaintenance Property Page ∙ Previously used print cartridge ∙ Color ink cartridge∙ New print cartridge CleanAlign Print the Alignment Test Pattern TestChecking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Document sent to the printer does not print Installation/Reference Guide for Front Panel LED is on continuouslyPage Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing Ink is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Selecting and ordering supplies Paper weights Cartridges and print headsSelecting plain paper Description Reorder NumberSelecting specialty print media Selecting labels Selecting transparenciesSelecting banner paper Selecting envelopesPrinting DOS in a Window Windows NT Index