Xerox Inkjet Printer manual Paper does not stack neatly in the paper output shelf

Page 70

The paper does not stack neatly in the paper output shelf

Cause

Suggested Solution

There is not enough clearance above the paper output shelf.

Place a sheet of paper in the paper output shelf. Check the clearance above the top of the sheet; there should be two inches of clearance.

The star wheel assembly bar is disengaged.

Open the printer cover. Reinstall the star wheel bar by pushing down on each end of the bar until it snaps into position.

The star wheels are out of position in the star wheel assembly.

Open the printer cover. Lift the star wheel bar by grasping each end of the bar and rotating it toward the back of the printer. Make sure the small wheels in the star wheel assembly are not pushed all the way inside the rectangular slots and are able to rotate freely. Then reinstall the star wheel bar and close the printer cover.

62

Image 70

Contents DocuPrint C8 Ink Jet Printer Publication number 701P30101 Customer Support Page Contents Troubleshooting the printer Selecting and ordering suppliesPrinting DOS in a Window Index Page Introduction Safety notes Generating Floppy Disks from your CDPage Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the printer’s features Hardware features Inside view of DocuPrint C8 Printer Back view of DocuPrint C8 Printer Control panel Operation Normal Printer OperationLED On Continuously LED Blinking Intermittently 0.2 sec On, 1.4 sec OffPrinter specifications Feature SpecificationFeatureSpecification System Requirements Printable area / Margins Recommended PossibleUsing the printer settings Downloading the Windows NT 4.0 Printer DriverLanguage field, select US English or French From the Printers folder for Windows 95/98 Accessing printer settingsFrom a Windows software application From the Printers folder for Windows NTPaper/Output Property Page Paper type Paper sizePrint quality Saved settings Photo quality Resolution isSave As button Status button Default AllDelete button Device mimic printer illustration in lower left cornerLayout Property Print crop marks Default buttonNumber of sheets Print sheetsClear All Cancel Help Select SheetsPrint borders Defaults buttonImages per sheet NoneMirror Image Image Quality Property Contrast SaturationGreen DefaultsRed BlueAbout Status Property Page Percent complete Now printingCopy RestartMaintenance Property Page ∙ Previously used print cartridge ∙ Color ink cartridge∙ New print cartridge CleanAlign Print the Alignment Test Pattern TestChecking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Document sent to the printer does not print Installation/Reference Guide for Front Panel LED is on continuouslyPage Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing Ink is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Selecting and ordering supplies Selecting plain paper Paper weightsCartridges and print heads Description Reorder NumberSelecting specialty print media Selecting banner paper Selecting labelsSelecting transparencies Selecting envelopesPrinting DOS in a Window Windows NT Index