Xerox Inkjet Printer manual

Page 47

All the buttons on the Maintenance Property Page are disabled if a job is being printed.

These are the Maintenance property page features and settings:

Information area This area is at the top of the screen and consists of an icon and a message area. The message area is used to report device warnings and errors. The text in the message area reports low ink, out of ink, out of paper, wrong print head, etc., as well as information about the problem.

Cartridge Mimic This image shows the currently installed print cartridge and the levels of ink in the cartridges. If the print cartridge cannot be determined, an "unknown" print cartridge is displayed. Three options are available:

1.Color print cartridge

2.High Capacity Black print cartridge

3."Unknown" print cartridge

The first two options display the ink levels in the cartridges. If an ink cartridge is low, a warning symbol appears on the mimic (a mini yellow triangle with an exclamation point).

39

Image 47
Contents DocuPrint C8 Ink Jet Printer Publication number 701P30101 Customer Support Page Contents Selecting and ordering supplies Troubleshooting the printerPrinting DOS in a Window Index Page Introduction Generating Floppy Disks from your CD Safety notesPage Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the printer’s features Hardware features Inside view of DocuPrint C8 Printer Back view of DocuPrint C8 Printer Normal Printer Operation Control panel OperationLED Blinking Intermittently 0.2 sec On, 1.4 sec Off LED On ContinuouslyFeature Specification Printer specificationsFeatureSpecification System Requirements Recommended Possible Printable area / MarginsDownloading the Windows NT 4.0 Printer Driver Using the printer settingsLanguage field, select US English or French From the Printers folder for Windows NT Accessing printer settingsFrom a Windows software application From the Printers folder for Windows 95/98Paper/Output Property Page Print quality Paper sizePaper type Save As button Photo quality Resolution isSaved settings Device mimic printer illustration in lower left corner Default AllDelete button Status buttonLayout Property Print sheets Default buttonNumber of sheets Print crop marksSelect Sheets Clear All Cancel HelpNone Defaults buttonImages per sheet Print bordersMirror Image Image Quality Property Saturation ContrastBlue DefaultsRed GreenAbout Status Property Page Restart Now printingCopy Percent completeMaintenance Property Page ∙ Color ink cartridge ∙ Previously used print cartridgeAlign Clean∙ New print cartridge Test Print the Alignment Test PatternChecking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Document sent to the printer does not print Front Panel LED is on continuously Installation/Reference Guide forPage Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing Ink is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Selecting and ordering supplies Description Reorder Number Paper weightsCartridges and print heads Selecting plain paperSelecting specialty print media Selecting envelopes Selecting labelsSelecting transparencies Selecting banner paperPrinting DOS in a Window Windows NT Index