Xerox 4260C manual Network Setup Using a Static IP Address, Select TCP/IP Settings

Page 15

•Press the Machine Status button then select Tools > Connectivity and

Network Setup > Advanced > Network Setting > Network Setup > TCP/IP Options > TCP/IP Settings.

•The allocated TCP/IP address is in the Name/Address field.

2Confirm that an IP address has been allocated and that it is an appropriate IP address for your network.

NOTE: If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly allocated an address or DHCP is not enabled on your network. Contact your network administrator for assistance.

Network Setup Using a Static IP Address

Before you begin, obtain the following information from your network administrator:

• IP Address

• Gateway Address

• Subnet Mask

• DNS Server Address

1 Press the Log In/Out button on the Control Panel, enter the Administrator’s Password [1111] and select Enter.

2Press the Machine Status button then select Tools > Connectivity and

Network Setup > Advanced > Network Setting > Network Setup > TCP/IP Options.

3Select HTTP and Enable. Select Save.

4Select TCP/IP Settings.

5Select the Dynamic Addressing button. By default, DHCP will be selected. Select Disabled to disable DHCP and select Save.

6Select Name/Address. Enter the Host Name, by selecting the Keyboard symbol. Enter the IP Address by touching each box and entering the number using the Numeric Keypad. Select Save.

7Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select Save.

8If you do not wish to configure DNS settings proceed to the next step. If you wish to configure DNS settings select the DNS Configuration button. Enter the Domain Name and the Preferred DNS Server address. Select Save.

9The static IP address is now set. Press the Log In/Out button and select Confirm to logout and close the Tools menu.

quick use guide

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents WorkCentre 4260 Series Page WorkCentre 4260 Series Page Xerox WorkCentre 4260 Series Quick Use Guide ContentsQuick use guide Install the WorkCentre 4260 Series Interface256MB Quick use guide Switch On the Machine Quick use guide Inside the Device Your WorkCentreDescription Control Panel OverviewLoading Documents Load Paper into the Paper TraysTest the device Connecting to the NetworkNetwork Connection using TCP/IP Network Setup Using DhcpSelect TCP/IP Settings Network Setup Using a Static IP AddressClick Install Drivers Click Install Print Drivers Install Print DriversClick Properties Connectivity Protocols TCP/IP Mail SetupEnter the Login Name and Password Fax Setup Setting up the Fax KitInterface Service Enablements Embedded Fax Installing Option Kits Installing Option KitsNetwork Accounting Server Fax Enable Server FaxCopy Output Edge Erase Page-layout Making CopiesPaper Supply Lighten / Darken Book Copying Covers SeparatorsCreating booklets Additional Copy FeaturesImage quality adjustment Reduce / EnlargePrinting a Document Toner Saver Additional Print FeaturesSaved settings Rotate imageSided Scanning Color Mode Sending a FaxOriginal Type Background Suppression Quick use guide Set up an Address Book Additional Fax FeaturesDelayed send Change the resolutionNetwork Scanning Update Templates Network Advanced Settings Layout Filing OptionsCreating Scanning Templates Additional Network Scanning FeaturesSending an E-mail Sided Scanning Background Scan to Edge Reply ToOriginal Type Quality/File Size Message Color Attachments Additional E-mail FeaturesEnhance your WorkCentre’s productivity Remote Administration Customize your deviceOn-line Address Book Powerful Documents Send paper documents as E-mailEasy Consumable Management Problem Solution TroubleshootingDocument jams Paper jamsOn the Print Driver HelpOn the device DocumentationOn CentreWare Internet Services Country Offset Region Greenwich Mean Time OffsetHttp//wwp.greenwichmeantime.com City/Region CityQuick use guide
Top Page Image Contents