Xerox 8850 manual Control panel

PRINTER OVERVIEW

Control panel

The control panel is located on top of the front side of the printer. It consists of a graphic display, a message display, several function keys, and a numeric keypad.

/C

1 2 3 4 5 6 7 8 9 10

1.Graphic display This is an illustration of the printer with indicator lights for the front door, the cutter drawer, the toner supply access cover, the cut sheet feed-in shelf, drawer 1, drawer 2, and drawer 3. The indicator lights have three states. "Off" is the normal state and signifies that no operator attention is required. "On" signifies that the associated interlock is open. "Flashing" signifies that operator attention is required.

2. Media key	Press this key to display and modify the current width (if
	applicable) and type settings for the media sources (drawer 1,
	drawer 2, drawer 3, and cut sheet feed-in shelf). This key is active
	from both on-line and off-line modes. Pressing this key while in
	off-line mode always displays the media settings regardless of
	which off-line menu is currently active.

3.Message display This is a 2-line, 40-character-per-line display.

4.	Previous key	Press this key to move backward through the printer menus and
		selections. For numeric values, pressing this key decreases the
		value by one unit.
5.	Next key	Press this key to move forward through the printer menus and
		selections. For numeric values, pressing this key increases the
		value by one unit.
6.	Enter key	Press this key to select the current menu item or value.
7.	Exit key	Press this key to undo the previous selection or to return to the
		next higher menu level. If you have modified a parameter, the
		parameter will remain unchanged.

4 XES SYNERGIX 8850 PRINTER OPERATOR MANUAL