Xerox 8850 manual Displaying the billing meter counts, Viewing the recent fault log

OFF-LINE SETUP MENU

Viewing the recent fault log

To view the recent fault:

1.Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter.

2.Press the Previous or Next key until DIAGNOSTICS is displayed.

3.Press the Enter key to select DIAGNOSTICS.

4.Press the Previous or Next key until RECENT FAULT LOG is displayed.

5.Press the Enter key to select RECENT FAULT LOG.

6.Press the Next key to display the two most recent faults.

7.Press the Previous or Next key to scroll through the fault listing.

8.When you are finished viewing the fault listing, press the On- line/Off-linekey to return to on-line mode.

•The on-line/off-line indicator will light.

•The display will indicate "XES SYNERGIX 8850 IDLE."

Displaying the billing meter counts

To display the billing meter counts:

1.Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter.

2.Press the Previous or Next key until BILLING METERS is displayed.

3.Press the Enter key to select BILLING METERS. The value for METER A is displayed. METER A provides the square footage of prints produced.

4.To view the value for METER B, press the Previous or Next key. METER B provides the linear feet of media produced.

5.When you are finished viewing the meter counts, press the On-line/Off-linekey to return to on-line mode.

•The on-line/off-line indicator will light.

•The display will indicate "XES SYNERGIX 8850 IDLE."

XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 25