Xerox 8850 manual Printer Menu options Option Sub-option Function

OFF-LINE SETUP MENU

Printer Menu

The Printer Menu allows you to control the operation of the printer.

This menu contains six options. The table below describes the

Printer Menu options and their sub-options.

Table 1. Printer Menu options

Option	Sub-option		Function
AUDIBLE INDICATORS	KEYPRESS	Enables or disables an audible beeper when a
		control panel key is pressed.
		Settings:	ON and OFF
		Default: ON
	ALARM	Enables or disables an audible beeper when
		the printer experiences a condition requiring
		immediate attention.
		Settings:	ON and OFF
		Default: ON
TIMERS	READY TO POWER SAVER	Controls the length of time the printer will
		remain idle before entering power saver
		mode.
		Settings: 5 to 50 minutes in 5-minute intervals
		Default: 50 minutes
		NOTE: A value of 0 prevents the printer from
		entering power saver mode.
	POWER SAVER TO REST	Controls the length of time the printer will
		remain idle in power saver mode before
		entering rest mode.
		Settings: 15 to 150 minutes in 15-minute
			intervals
		Default: 150 minutes
		NOTE: A value of 0 prevents the printer from
		entering rest mode.
PRINTER ADJUSTMENTS	DENSITY	Increases or decreases the print density.
		Settings:	0 (lightest) to 10 (darkest)
		Default: 5
FINISHER SETTINGS	FINISHER CONFIG TYPE	Specifies the folder configuration type.
		Settings: NONE (no finisher) and 003
			(Generic Finisher Interface)
		Default: NONE

20 XES SYNERGIX 8850 PRINTER OPERATOR MANUAL