Xerox 96 NPS manual Adjusting Print Quality and Speed

Page 47

ADJUSTING PRINT QUALITY AND SPEED

Figure 7-2.Three registration transport roll levers on system with 7 by 10-inch enablement kit

1Lever 1: Left - Maximum Pressure setting

2Lever 2: Right - Maximum Pressure setting

3Lever 3: Right - Maximum Pressure setting

4.When the print job is complete, return the levers to their normal position.

5.Close the doors.

Note: Here are a few things to keep in mind when adjusting the registration transport roll lever:

•Position all levers for the same (either minimum or maximum) pressure setting. Do not intermix the positions of the levers.

•

•

•

Paper greater than 14 inches / 352 mm in any dimension is considered oversized.

Paper heaver than 24 pounds / 90 gsm is considered heavy weight.

The following factors may affect the positioning of the paper levers:

—Machine tolerance

—Paper supplier

—Job type (e.g., duplex).(clockwise).

XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE

7-3

Image 47

Contents Version 7.1 August 2000 721P86651 Page Ozone information Laser safetyOperation safety Xerox Docuprint 96/4635/180 NPS Troubleshooting Guide Table of contents Correcting stacking problems System unresponsive Index About this guide ContentsIntroduction Conventions DocuPrint NPS Interactive Customer Documentation CD Related publicationsPage Information to have on hand when calling for service Calling for serviceEnabling and disabling the modem for remote service Fault masking Fault List screen Troubleshooting Xerox Client Software installation Troubleshooting Xerox Client Software Installation PASSWORDS=ON at Troubleshooting a Novell implementationPserver problems Problem Probable Cause Resolution Problem Probable Cause Resolution Rprinter problems Problem Probable Cause Resolution Page Clearing paper misfeeds and jams Clearing a feeder tray faultClearing Paper Misfeeds and Jams Frequent misfeeds Clearing paper jams Checking job integrity following a paper jam Fault InstructionsArea Printer areasArea Area Area Area Area Area Area Area Area Clearing bypass transport paper jams Area Measuring the paper curl Paper curl and paper jamsDecurler lever Adjusting the decurler leverPaper curl chart Arguments None Using sample documentsListing and printing sample documents List Sample DocumentsArguments Document Print Sample DocumentPS-oplist sample documents Using Sample Documents Page Installing the custom transfer assist blade Adjusting print quality and speedCorrecting skewed printing Adjusting the registration transport roll leversAdjusting Print Quality and Speed Measuring performance Calculating throughput Enter Start Printing Minimizing the start-up latency 99995163.ps, November 19, 1996 35222 pm PST Dpi versus 600 dpi performance Proprietary PostScript extensions Setting page orderProduct features that affect print quality Gray shading-settransfer and transfer function Device-dependent operatorsGray shading-setscreen and setcolorscreen Scan conversion-fill, eofill, and stroke Settransfer, or SetcolortransferSmooth curves-setflat Invisible strokes-0 setlinewidthSymptom Probable cause Action Correcting stacking problemsPage System unresponsive Configuring and Managing the System forPage Numerics IndexIndex