Xerox 96 NPS manual Correcting stacking problems, Symptom Probable cause Action

Page 57

8.Correcting stacking problems

This chapter describes stacker problems other than paper jams. It suggests corrective actions when printed sets are thrown around the stacker or the bin. (See “Clearing paper misfeeds and jams” for stacker paper jams.)

Symptom	Probable cause	Action

Papers are thrown around the	Someone unloaded paper by	Unload the bin following the normal procedure.
stacker.	opening the top cover of the	See “Unloading Stacker bin” in Guide to
	stacker bin.	Performing Routine Maintenance.).

Paper stack falls over or slides	Excessive paper curl	Try adjusting for paper curl (See “Paper curl
around the bin		and paper jams” in Guide to Performing
		Routine Maintenance

Printing stops and the printer	Incorrect paper size or a	1. Check the paper in the indicated tray.
console displays a message	damaged sheet.	2. If the paper is not the correct size, load
indicating that an incorrect		2. If the paper is not the correct size, load
indicating that an incorrect		the correct size paper or select another
paper size is loaded in a		the correct size paper or select another
paper size is loaded in a		feeder tray containing the correct paper
feeder tray.		feeder tray containing the correct paper
feeder tray.		size.
		size.
		If the paper size is correct, press the
		Continue button to resume printing.

XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE

8-1

Image 57

Contents Version 7.1 August 2000 721P86651 Page Laser safety Operation safetyOzone information Xerox Docuprint 96/4635/180 NPS Troubleshooting Guide Table of contents Correcting stacking problems System unresponsive Index Contents IntroductionAbout this guide Conventions DocuPrint NPS Interactive Customer Documentation CD Related publicationsPage Information to have on hand when calling for service Calling for serviceEnabling and disabling the modem for remote service Fault masking Fault List screen Troubleshooting Xerox Client Software installation Troubleshooting Xerox Client Software Installation Troubleshooting a Novell implementation Pserver problems Problem Probable Cause ResolutionPASSWORDS=ON at Problem Probable Cause Resolution Rprinter problems Problem Probable Cause Resolution Page Clearing paper misfeeds and jams Clearing a feeder tray faultClearing Paper Misfeeds and Jams Frequent misfeeds Clearing paper jams Checking job integrity following a paper jam Fault InstructionsArea Printer areasArea Area Area Area Area Area Area Area Area Clearing bypass transport paper jams Area Measuring the paper curl Paper curl and paper jamsDecurler lever Adjusting the decurler leverPaper curl chart Listing and printing sample documents Using sample documentsList Sample Documents Arguments NonePrint Sample Document PS-oplist sample documentsArguments Document Using Sample Documents Page Installing the custom transfer assist blade Adjusting print quality and speedCorrecting skewed printing Adjusting the registration transport roll leversAdjusting Print Quality and Speed Measuring performance Calculating throughput Enter Start Printing Minimizing the start-up latency 99995163.ps, November 19, 1996 35222 pm PST Dpi versus 600 dpi performance Setting page order Product features that affect print qualityProprietary PostScript extensions Device-dependent operators Gray shading-setscreen and setcolorscreenGray shading-settransfer and transfer function Smooth curves-setflat Settransfer, or SetcolortransferInvisible strokes-0 setlinewidth Scan conversion-fill, eofill, and strokeSymptom Probable cause Action Correcting stacking problemsPage System unresponsive Configuring and Managing the System forPage Numerics IndexIndex