Xerox DocuPrint 180 manual Document conventions, Bold, Italics, Terminal font, Underline

INTRODUCTION

Document conventions

This guide uses the following conventions:

<> Angle brackets are used for keys on the system controller keyboard.

{} Curly brackets are used for required characters.

...				Ellipses indicate that you can repeat a parameter or list a series of
				parameters.
[ ]				Square brackets are used for optional command characters.
			l	Vertical bars are used to separate parameters in a series. The
				vertical bar stands for “or.”
		bold		Bold is used for characters you enter at the command line.
	italics			Italics is used for variable information.
terminal font				Terminal or monospace font is used to display system responses.
underline				System default parameters are underlined.
UPPERCASE				Uppercase letters are used for command names.
				Note: You may key in entire words for each command or the first
				three characters of each word. In this manual the entire word of each
				command is spelled out.
				Caution: Cautions alert you to an action that could damage
				hardware or software.

Warning: Warnings alert you to conditions that may affect the

!safety of people.

XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE xiii