Xerox manual Electrical requirements, DocuPrint 180 electrical requirements

XEROX DOCUPRINT 180 LPS OVERVIEW

Electrical requirements

			Table 1-4 shows the electrical requirements for the Xerox DocuPrint
			180 LPS.
			Table 1-4.DocuPrint 180 electrical requirements
Electrical requirements
Printer	Dual cord system (60Hz):
		Cord 1:	120/208 VAC(182V to 220V) (2 phase), 50 amp dedicated service
		Cord 2:	120/208 VAC(182V to 220V) (2 phase), 30 amp dedicated service
	Single cord system (50Hz):
		WYE:	80/400/415 VAC (3 phase, 5 wire), 20 amp dedicated service
		Delta:	220/230/240 VAC (3 phase, 4 wire), 30 amp dedicated service
	KVA rating:		7.3 (operating)
System Controller	U.S. and Canada, 60 Hz:
	208/240 VAC (1 phase) or 208/220 VAC (Line 1 to Line 2);
	15 amp service
	NEMA 6-15R or ANSI C73, 20R
	KVA 1.1 (operating)
	International, 50 Hz:
	200/230 VAC (1 phase)
	15 amp service;
	Power connector per local codes
Optional Peripheral Cabinet	U.S. and Canada, 60Hz:
	208/240 VAC (1 phase) or
	208/220 VAC (Line 1 to line 2);
	15 amp service;
	NEMA6-15R or ANSI C73, 20R
	KVA .9 in both standby and operation
	International, 50 Hz:
	200/230 VAC (1 phase);
	15 amp service;
	Power connector per local codes
Optional bypass transport	The power requirements for the bypass transport module are all satisfied by the
	DocuPrint 180 LPS printer module.
Agency certification	UL, CSA, IEC, VDE
			Note: For more information on Xerox DocuPrint 180 LPS electrical
			requirements, including power cord and outlet specifications, refer to
			the Xerox DocuPrint 180 LPS Installation Planning Guide.

XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE 1-9