Xerox manual Comparing DocuPrint 180 LPS print job resolution

PRODUCT DIFFERENCES/USER CONSIDERATIONS

tray. Refer to the Xerox DocuPrint 180 LPS Operator Guide for loading instructions.

Note: Paper sizes with differences exceeding +25 mm in either dimension cannot stack in the same bin. Feed Auto must be used, and manual collation of the job is required upon completion. Some applications written for a 9700F printer using multiple sizes (e.g. 8 X 11 variable data merge with 8.5 X 11 forms) may not run on the DocuPrint 180 LPS due to added capability for paper size checking between feed trays and user defined paper size statements in the JSL/FSL.

Comparing DocuPrint 180 LPS print job resolution

Since Xerox laser printing systems have different print resolution capabilities, it is important to compare the print resolution functionality of your Xerox DocuPrint 180 LPS and of the LPS the job was created on. Table 5-9 illustrates the print resolution functionalities of the Xerox LPS.

Table 5-9.Print resolution of print jobs created or printed on

LPS

Paper resolution	DP180
functionality	& 4635	4050	4650	4090	4850	9790	8790
Creates and prints	*	*		*	*	*	*
300 dpi jobs
Creates 300 dpi	*		*
jobs but prints in
600 dpi
Creates and prints			*
600 dpi jobs
Creates but does		*		*	*	*	*
not print 600 dpi

Note: 600 dpi jobs can be created and compiled on an LPS only if 600 dpi fonts are loaded. Likewise, 300 dpi jobs can be created and compiled on an LPS only if 300 dpi fonts are loaded.

5-10 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE