XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
Printer hardware components
Figure 3-6 shows the components of the Xerox DocuPrint 180 LPS printer module.
Figure 3-6. Xerox DocuPrint 180 LPS Printer
1Processor feeder trays
2Inverter-feeder/stacker module (containing inverter, high- capacity feeder, and high-capacity stacker)
3Feeder/stacker module (containing high-capacity feeder and high-capacity stacker)
4Purge tray
5Attention light
6Sample tray
7Printer control console
Note: Configuration shown in Figure
Processor feeder tray 1 Located in the main part of the printer, the capacity of feeder tray 1 is 1,100 sheets of
Processor feeder tray 2 The capacity of feeder tray 2 is 600 sheets of
Trays 1 and 2 can handle paper sized from 8- by
(5 and 6 optional) 11.69- by
(C and D optional) HCS for easier separation of reports.
Sample tray The capacity of the sample tray is 100 sheets of
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE |