XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
Purge tray The purge tray located at the top of the last feeder/stacker module is where waste sheets are sent when cleared from the printer. The purge tray can hold 100 sheets of paper.
Printer control console The printer control console located on top of the printer contains the continue, stop, and sample buttons. The console has a color monitor with a
Optional bypass transport The ability to increase your production capability by adding finishing devices to your Xerox DocuPrint 180 LPS is made possible by the Bypass Transport option. Finishers give you the ability to choose a wide range of finishing options, such as shrink wrapping and stitching. The bypass transport processes simplex and duplex jobs and accepts any type of paper that your Xerox DocuPrint 180 LPS is capable of handling (refer to the “Xerox DocuPrint 180 LPS overview” chapter).
Connected to the feeder/stacker, the bypass transport allows finishing devices to interface directly with your Xerox DocuPrint 180 LPS. It is fully integrated into your Xerox DocuPrint 180 LPS hardware and software utilities, allowing you to select it at the UI or within your job setup. The bypass transport meets the Xerox Document Feeding and Finishing Architecture (DFA) Level 1 specifications.
Optional input enablement device The input enablement device is connected to the right side of the feeder/stacker module and provides the means to add bulk feeders to your Xerox DocuPrint 180 LPS. Fully integrated into your Xerox DocuPrint 180 LPS hardware and software utilities, your input enablement device is selectable at the UI or within your job setup.
Figure 3-7 shows the Xerox DocuPrint 180 LPS with the optional bypass transport.
Figure 3-7. Xerox DocuPrint 180 LPS with optional bypass transport
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE |